Full Version: USB Cable Length
From: LaZerDude (C_BURKE) [#1]
14 Apr 2007
To: ALL
In adding the Vision, I need to do some rearranging in my limited work space.
This is going to require relocating my OKI laser printer. The cable run from the computer to the Oki will be close to 20 feet.
My question is, is there a length maximum for usb cables before performance diminishes?
thanks
NEVERMIND! :-$ I found the answer HERE
EDITED: 14 Apr 2007 by C_BURKE
From: PenTrophy (PENINSULATROPHY) [#2]
14 Apr 2007
To: LaZerDude (C_BURKE) [#1] 14 Apr 2007
Several articles I have found all say:
"The max cable length MOTU recommends between a USB computer and USB interface is 5 meters (16.5 feet). Longer runs can be achieved thru the use of POWERED USB HUBS."
From: LaZerDude (C_BURKE) [#3]
14 Apr 2007
To: PenTrophy (PENINSULATROPHY) [#2] 14 Apr 2007
Thanks Mark....I see that now....
So I need to reroute the cable ....but I can bring it in under 15 feet....so it will be ok.
From: Engravin' Dave (DATAKES) [#4]
14 Apr 2007
To: LaZerDude (C_BURKE) [#1] 14 Apr 2007
Chuck,
Is your printer network ready? In other words, can you connect an ethernet cable from a network hub to your printer? If so, you can set your printer up as a network printer and run a much longer distance using a CAT5 cable.
I use the ethernet connection on my laser and have a cable that runs from my laser, up the wall, across the ceiling, down the wall, and into my computer. That cable is about 45 feet. I've never ever had a communication issue with my laser.
EDITED: 14 Apr 2007 by DATAKES
From: LaZerDude (C_BURKE) [#5]
14 Apr 2007
To: Engravin' Dave (DATAKES) [#4] 14 Apr 2007