ArtCam - Engraving Etc. Forum

<body> <h1>Full Version: <a href="https://www.engravingetc.org:443/archive/index.php?webtag=EE&msg=4228.2">ArtCam</a></h1><a name="a4228_2"></a><p><b>From: gingem</b> [<a href="lmessages.php?webtag=EE&msg=4228.2">#2</a>]<br /> 1 Jul 2006<br /><b>To: ALL</b></p> I have been using Artcam for about 2 years now. Great program, possibly a long learning curve though. I use the Jewelsmith version which is Artcam Pro with added features. I have a 4 axis mill that I use with it. <hr /><a name="a4228_3"></a><p><b>From: clay (CLAY_J1955)</b> [<a href="lmessages.php?webtag=EE&msg=4228.3">#3</a>]<br /> 1 Jul 2006<br /><b>To: Mido</b> [<a href="lmessages.php?webtag=EE&msg=4228.1">#1</a>] 1 Jul 2006</p> <p>I used it in the early versions of the programs, lots of bugs ie.....the fill routines were very poor. I have since heard its a lot better. As gingem stated, most likely a big learning curve, but it is very powerful. If you currently have a backgroung in cad/cam software its the complete opposite of what you would be used to. In the end I did all my 3d in a program called Rhino and then imported it into a program called Alphacam to write the g-code. </p> <p>good luck<br /> clay</p><hr /><p align="center">Show messages: <a href="lmessages.php?webtag=EE&msg=4228.1">All</a>  <a href="lmessages.php?webtag=EE&msg=4228.1">1</a>  2-3</p> <h4><a href="lthread_list.php?webtag=EE">Back to thread list</a> | <a href="llogout.php?webtag=EE">Login</a></h4> <h6>© 2025 <a href="http://www.beehiveforum.net/" target="_blank">Project Beehive Forum</a></h6> </body>