From: Stunt Engraver (DGL) [#18]
18 Aug 2005
To: ALL
Thanks to everyone for making this a very informative thread. Between the Bondo molds (and other materials) and the various vise/jig solutions, Colin should be able to tackle this job.
Looks like there are numerous "Stunt Engravers" in our ranks! :-)
From: logojohn [#19]
19 Aug 2005
To: Colin (MATROPHY) [#17] 19 Aug 2005
I used 1.5
I made a layout the size of the block with the holes drawn.
I printed it out and positioned it on the block for drilling.
The holes can be a little off and oversized and still hold the block when the vice is closed.
Show messages: All
1-17
18-19