From: laserman (MIKEMAC) [#9]
5 Apr 2007
To: UncleSteve [#1] 5 Apr 2007
UncleSteve,
What we used to do was to drill a couple of 1/4 holes into the top part of the hose of the vacuum this allowed for some cooling air and did not reduce the suction.
From: UncleSteve [#10]
5 Apr 2007
To: laserman (MIKEMAC) [#9] 6 Apr 2007
I can try that.... the noise won't lessen but at least it will make the shopvac last longer...
I know that the old Electrolux tank vacuums had holes in the metal end of the hose with a clip that went around most of it. By turning the clip, it uncovered different amounts of holes to lessen the suction...
Now if I could find an old hose..... <G>
Show messages: All
1-8
9-10