Full Version: ARA Las Vegas 2006 (The List)
From: LARRY (CENTURYBADGE) [#36]
4 Jan 2006
To: Stunt Engraver (DGL) [#13] 4 Jan 2006
Hi,
Please put us on the list of members attending the ARA show in Vegas. Have attended the last two years and can't live without it.
Larry & Sandy Herman
Century Badge & Engraving, Inc.
PS: why don't we all wear a badge so we reconize each other.
something small like a small oval badge saying something.
From: Harvey only (HARVEY-ONLY) [#37]
4 Jan 2006
To: LARRY (CENTURYBADGE) [#36] 5 Jan 2006
I was thinking about the EE logo on top and the forum name underneath. For those who sublimate in color, for those who laser in greyscale, and for those who only rout a routed, (what else?), badge.
When I get home I will post the varius logos, unless David beats me to that. (It will be just under a week till I get home again.)
From: Stunt Engraver (DGL) [#38]
4 Jan 2006
To: LARRY (CENTURYBADGE) [#36] 5 Jan 2006
Looking forward to meeting you during the show.
Here's the updated list of forum members, we can look forward to meeting at the ARA Show:
Peter & Kathy Vasic (Engraving Services Co.)
Harvey & Dee Lentchner (Accent on Engraving)
David Lavaneri (DGL Engraving)
Mick Eminger (Cactus Equipment)
Cody & Janna Stewart (Eternity Creations)
Joe & Toni Hayes (Graphics Galore Inc.)
Ed & Sharon Holley (Victor Valley Trophy Co.)
Jeff & Lisa Higginbotham (TrophyUSA)
A J Palik (Photon Graphics)
Rolf & Leslie (Mountain Memories)
Roy Brewer, Jeanette Brewer & Randy Allen (Engraving Concepts)
Mike Mackenzie & Treavor Hertel (CEM)
Bruce and Packy Larson
Chuck Burke (American Pacific Awards)
Larry & Sandy Herman (Century Badge & Engraving, Inc.)
From: Stunt Engraver (DGL) [#39]
4 Jan 2006
To: Harvey only (HARVEY-ONLY) [#37] 4 Jan 2006
Break out the wet noodle. I can't find the logos.
From: Russ (MEATSHAKE) [#40]
4 Jan 2006
To: ALL
Hi All,
I'm new to the forum and am about 99% sure that I am going to make it to the show. I might even be working it.
Joyce I would like to come by and see your shop. Being a newbie to laser engraving and sandcarving I want to learn all I can.
Please add me and my wife to the list.
Russ and Martha Warrick with WarrLight Engraving
From: Stunt Engraver (DGL) [#41]
4 Jan 2006
To: Russ (MEATSHAKE) [#40] 6 Jan 2006
Hmmm...pardon me for not asking what that handle means. :-)
In what capacity might you be working the show, if I may ask?
In any event, here's the updated list of forum members, we can look forward to meeting at the ARA Show:
Peter & Kathy Vasic (Engraving Services Co.)
Harvey & Dee Lentchner (Accent on Engraving)
David Lavaneri (DGL Engraving)
Mick Eminger (Cactus Equipment)
Cody & Janna Stewart (Eternity Creations)
Joe & Toni Hayes (Graphics Galore Inc.)
Ed & Sharon Holley (Victor Valley Trophy Co.)
Jeff & Lisa Higginbotham (TrophyUSA)
A J Palik (Photon Graphics)
Rolf & Leslie (Mountain Memories)
Roy Brewer, Jeanette Brewer & Randy Allen (Engraving Concepts)
Mike Mackenzie & Treavor Hertel (CEM)
Bruce and Packy Larson
Chuck Burke (American Pacific Awards)
Larry & Sandy Herman (Century Badge & Engraving, Inc.)
Russ & Martha Warrick (WarrLight Engraving)
From: Engravin' Dave (DATAKES) [#42]
4 Jan 2006
To: Russ (MEATSHAKE) [#40] 6 Jan 2006
Russ,
Welcome to Engraving Etc. You will find this group to be just as fun and friendly as the folks at the Cutting Edge. If your not careful you may learn a thing or two. I certainly have.
:D
EDITED: 4 Jan 2006 by DATAKES
From: John (JOHNRMONTG) [#43]
5 Jan 2006
To: Stunt Engraver (DGL) [#21] 5 Jan 2006
David ... as you no doubt remember, Anothony, formerly with Farro USA, generously provided us with beautiful pins that many of us lucky participants wore. I don't know if they would still be available or not but that worked out really well for me and I am sure the others..(even after working on the design and finally making a unique badge for the event!) that ultimately I liked a lot better and was very noticable to all that recognized them.
What do you think?
From: Mick [#44]
5 Jan 2006
To: John (JOHNRMONTG) [#43] 5 Jan 2006
From: John (JOHNRMONTG) [#45]
5 Jan 2006
To: Mick [#44] 6 Jan 2006
From: Stunt Engraver (DGL) [#46]
5 Jan 2006
To: John (JOHNRMONTG) [#43] 5 Jan 2006
John,
Yes, I remember the pins. Other than a nice way to recognize fellow EE members at the show, the pins made a nice commemorative piece.
I'll look into it.
EDITED: 6 Jan 2006 by DGL
From: Engravin' Dave (DATAKES) [#47]
5 Jan 2006
To: Mick [#44] 6 Jan 2006
From: Stunt Engraver (DGL) [#48]
6 Jan 2006
To: John (JOHNRMONTG) [#43] 6 Jan 2006
John,
I'm assuming that you're attending the ARA show.
Naturally, "The List" is for entertainment purposes only, and doesn't represent a binding commitment, but would you like me to add your name to the list? :-)
EDITED: 6 Jan 2006 by DGL
From: Rob (AWARDZZ) [#49]
6 Jan 2006
To: ALL
North East Ohio will be there!!!!
Rob Simpson
PlayAll Awards & Engraving
Ashtabula, OH
(on the snowy southern shores of Lake Erie)
From: LaZerDude (C_BURKE) [#50]
6 Jan 2006
To: John (JOHNRMONTG) [#43] 6 Jan 2006
John,
I still have my pin from last year. I'll be wearing it this year. Have you decided yet if you can make it?
From: Stunt Engraver (DGL) [#51]
6 Jan 2006
To: Rob (AWARDZZ) [#49] 7 Jan 2006
Happy to hear you'll be at the show.
Here's the updated list of forum members, we can look forward to meeting at the ARA Show:
Peter & Kathy Vasic (Engraving Services Co.)
Harvey & Dee Lentchner (Accent on Engraving)
David Lavaneri (DGL Engraving)
Mick Eminger (Cactus Equipment)
Cody & Janna Stewart (Eternity Creations)
Joe & Toni Hayes (Graphics Galore Inc.)
Ed & Sharon Holley (Victor Valley Trophy Co.)
Jeff & Lisa Higginbotham (TrophyUSA)
A J Palik (Photon Graphics)
Rolf & Leslie (Mountain Memories)
Roy Brewer, Jeanette Brewer & Randy Allen (Engraving Concepts)
Mike Mackenzie & Treavor Hertel (CEM)
Bruce and Packy Larson
Chuck Burke (American Pacific Awards)
Larry & Sandy Herman (Century Badge & Engraving, Inc.)
Russ & Martha Warrick (WarrLight Engraving)
Rob Simpson (PlayAll Awards & Engraving)
From: John (JOHNRMONTG) [#52]
6 Jan 2006
To: Stunt Engraver (DGL) [#48] 6 Jan 2006
From: Stunt Engraver (DGL) [#53]
6 Jan 2006
To: John (JOHNRMONTG) [#52] 6 Jan 2006
I understand completely. It's not always easy to get away for the show.
We'll put you down as a definite maybe. :-)
Here's the updated list of forum members, we can look forward to meeting at the ARA Show:
Peter & Kathy Vasic (Engraving Services Co.)
Harvey & Dee Lentchner (Accent on Engraving)
David Lavaneri (DGL Engraving)
Mick Eminger (Cactus Equipment)
Cody & Janna Stewart (Eternity Creations)
Joe & Toni Hayes (Graphics Galore Inc.)
Ed & Sharon Holley (Victor Valley Trophy Co.)
Jeff & Lisa Higginbotham (TrophyUSA)
A J Palik (Photon Graphics)
Rolf & Leslie (Mountain Memories)
Roy Brewer, Jeanette Brewer & Randy Allen (Engraving Concepts)
Mike Mackenzie & Treavor Hertel (CEM)
Bruce and Packy Larson
Chuck Burke (American Pacific Awards)
Larry & Sandy Herman (Century Badge & Engraving, Inc.)
Russ & Martha Warrick (WarrLight Engraving)
Rob Simpson (PlayAll Awards & Engraving)
John & Alexa Montgomery (Lakeshore Engraving)
From: Rolf (RJB2108) [#54]
6 Jan 2006
To: ALL
I still have mine from last year too. I'll proudly wear it too !!
I mean C'mon if someone sees this pin on me, they immidiatly know that I'm part of an elite group.
From: Russ (MEATSHAKE) [#55]
6 Jan 2006
To: ALL
David,
I might be working in a booth doing sandcarving. I am also distributor for A Blast, a company that makes sandcarving equipment.
We do laser engraving and sandcarving. We do a good amount of wine bottles for the wineries in the area. We use our Epilog laser with Laser Tape on the bottles and then we sandcarve the bottles.
Show messages: 1-15 16-35 36-55 56-75 76-95 96-115 … 336-343