Full Version: ARA Las Vegas 2006 (The List)

From: LaZerDude (C_BURKE) [#75]
13 Jan 2006
To: Stunt Engraver (DGL) [#74] 13 Jan 2006

Cool. If you need help let me know. I have a suprise in store if it is Thursday.....but it must be a FIRM commitment to attend. Or as firm as it can be given THIS group. :D (Insert laugh here).

From: Rolf (RJB2108) [#76]
14 Jan 2006
To: Stunt Engraver (DGL) [#74] 14 Jan 2006

David,
Thursday sounds good for me too.
I too want to offer you my help. If there is anything I can do or bring from the east coast let me know. Also Leslie and I will be there on Tuesday night. We stay at the Hilton. If you need any help there, I can do that too. I can give you my cell # so that you can get in touch with me.
Rolf

From: Stunt Engraver (DGL) [#77]
14 Jan 2006
To: Rolf (RJB2108) [#76] 14 Jan 2006

Rolf,

Thank you (and Chuck) for your offers of help. At this point, if we end up at Quark's, I can't think of anything that needs to be done.

We seem to be developing what looks to be a good turnout. If we can get 50 people or more, to commit to a Thursday evening get-together, we may want to consider taking the party, directly across the street from the Convention Center, to "The Beach" which is a club where we can reserve a private room, for an all-you-can-eat/drink extravaganza.

We did that with DSSI a few years ago and I thought it was great.

Plenty of space, tables with comfortable chairs, decent buffet, pool table and best off all; all of our forum member friends in one place for 3 or 4 hours, which left plenty of time to hit the town afterwards.

EDITED: 14 Jan 2006 by DGL

From: Russ (MEATSHAKE) [#78]
14 Jan 2006
To: Stunt Engraver (DGL) [#77] 14 Jan 2006

Dave~
I know I am new to the group and would like to help out all I can. I don't know yet what my extra curricular activities are going to be yet.

I do know there are going to be a night or two that I have to go out to dinner with the owner of A Blast. Other than that things are still up in the air. I should know more as we get closer to the show. Still waiting for things to fall into place.

Let me know if I can be of any help before and maybe meet after we get there.

Once agin things are not clear yet but I think we are stying at the Hilton. If not very close to the LVCC>

From: Stunt Engraver (DGL) [#79]
14 Jan 2006
To: Russ (MEATSHAKE) [#78] 15 Jan 2006

Russ,

Thanks for the offer of help. If we find any areas where we can use it, we'll certainly let you know.

From: Awardsguy [#80]
15 Jan 2006
To: ALL

I'm new to EE, but in the business for about 9 years. Found out about this through a salseman. Anyway, the room's booked, the flights booked and I'll be at ARA Las Vegas for the first time. Look forward to meeting some of you!

From: Engravin' Dave (DATAKES) [#81]
15 Jan 2006
To: Awardsguy [#80] 17 Jan 2006

Garry,

Welcome to the forum from a former Iowan. I know your turf very well. We usually stop for lunch in Clive to break up our family trips to and from Cedar Rapids, where most of my family still lives.

EDITED: 15 Jan 2006 by DATAKES

From: Stunt Engraver (DGL) [#82]
15 Jan 2006
To: Awardsguy [#80] 17 Jan 2006

Garry,

Sounds like the salesman gave you a good tip. :-)

Looking forward to meeting you in Las Vegas.

Here's the updated list of forum members, we can look forward to meeting at the ARA Show:

Peter & Kathy Vasic (Engraving Services Co.)
Harvey & Dee Lentchner (Accent on Engraving)
David Lavaneri (DGL Engraving)
Mick Eminger (Cactus Equipment)
Cody & Janna Stewart (Eternity Creations)
Joe & Toni Hayes (Graphics Galore Inc.)
Ed & Sharon Holley (Victor Valley Trophy Co.)
Jeff & Lisa Higginbotham (TrophyUSA)
A J Palik (Photon Graphics)
Rolf & Leslie (Mountain Memories)
Roy Brewer, Jeanette Brewer & Randy Allen (Engraving Concepts)
Mike Mackenzie & Treavor Hertel (CEM)
Bruce and Packy Larson
Chuck Burke (American Pacific Awards)
Larry & Sandy Herman (Century Badge & Engraving, Inc.)
Russ & Martha Warrick (WarrLight Engraving)
Rob Simpson (PlayAll Awards & Engraving)
John & Alexa Montgomery (Lakeshore Engraving)
Greg Bencsik & Debbie Koehler (Bux-Mont Awards)
Zona & Steve Hudkins (Zona's Engraved Creations)
Garry (AAA Awards & Embroidery)

From: JHayes55 [#83]
16 Jan 2006
To: Awardsguy [#80] 17 Jan 2006

Garry - Which rep gave you the tip about the forum - one of my reps also covers Iowa - just wondering if it was him.

From: Boz (CHEDDARHEAD) [#84]
16 Jan 2006
To: ALL

Hey, don't forget about us. Diane and Rob Bosworth of ACCESS Business Solutions, Inc. We haven't figured it all out yet, but we will be there. I think we are going to try to stay downtown this year. Seems like we have tired everything else, so why not downtown. Maybe next year will be Bullhead City. See you there. We'll be the good looking couple.

From: Russ (MEATSHAKE) [#85]
16 Jan 2006
To: Boz (CHEDDARHEAD) [#84] 17 Jan 2006

quote:

We'll be the good looking couple.

There is no conceit in your family, you have it all!

From: Stunt Engraver (DGL) [#86]
16 Jan 2006
To: Boz (CHEDDARHEAD) [#84] 17 Jan 2006

Rob,

We'll keep an eye out for the two of you, although there's an extremely off-chance, there will be another good looking couple in town that week. :P

Here's the updated list of forum members, we can look forward to meeting at the ARA Show:

Peter & Kathy Vasic (Engraving Services Co.)
Harvey & Dee Lentchner (Accent on Engraving)
David Lavaneri (DGL Engraving)
Mick Eminger (Cactus Equipment)
Cody & Janna Stewart (Eternity Creations)
Joe & Toni Hayes (Graphics Galore Inc.)
Ed & Sharon Holley (Victor Valley Trophy Co.)
Jeff & Lisa Higginbotham (TrophyUSA)
A J Palik (Photon Graphics)
Rolf & Leslie (Mountain Memories)
Roy Brewer, Jeanette Brewer & Randy Allen (Engraving Concepts)
Mike Mackenzie & Treavor Hertel (CEM)
Bruce and Packy Larson
Chuck Burke (American Pacific Awards)
Larry & Sandy Herman (Century Badge & Engraving, Inc.)
Russ & Martha Warrick (WarrLight Engraving)
Rob Simpson (PlayAll Awards & Engraving)
John & Alexa Montgomery (Lakeshore Engraving)
Greg Bencsik & Debbie Koehler (Bux-Mont Awards)
Zona & Steve Hudkins (Zona's Engraved Creations)
Garry (AAA Awards & Embroidery)
Diane & Rob Bosworth (ACCESS Business Solutions, Inc.)

EDITED: 16 Jan 2006 by DGL

From: Becky (KIAIJANE) [#87]
16 Jan 2006
To: Stunt Engraver (DGL) [#86] 16 Jan 2006

I'm not sure if you are adding vendors only to the list but I will be at the show (first time) and am looking forward to it. I would love to meet all of you and get together. If it's a vendors only kind of thing, I will see you at the show.
Thanks
Rebecca Leedy
YNH Laser Graphics Company

From: Stunt Engraver (DGL) [#88]
16 Jan 2006
To: Becky (KIAIJANE) [#87] 16 Jan 2006

Rebecca,

By all means. Come one, come all! The current list is a mix of vendors and "regular" people as well. :-)

Looking forward to seeing you there.

Here's the updated list of forum members, we can look forward to meeting at the ARA Show:

EDITED: 16 Jan 2006 by DGL

From: Becky (KIAIJANE) [#89]
16 Jan 2006
To: Stunt Engraver (DGL) [#88] 16 Jan 2006

So how do we distinguish ourselves as EE members? Is there a secret handshake or something? LOL

From: Cody (BOBTNAILER) [#90]
16 Jan 2006
To: Becky (KIAIJANE) [#89] 16 Jan 2006

You can usually recognize a fellow member by the goofy smile on their face. If that doesn't work, we have a secret greeting: three cartwheels, followed by a loud "hooty whoo!".

;-)

There's been some talk about a nametag design just for EE members, but nothing's been finalized yet.

From: Becky (KIAIJANE) [#91]
16 Jan 2006
To: Cody (BOBTNAILER) [#90] 16 Jan 2006

All right, but if I throw my back out doing these cartwheels, there's gonna be heck to pay.
And it was a "hooty whoo" right?

From: Stunt Engraver (DGL) [#92]
16 Jan 2006
To: Becky (KIAIJANE) [#89] 16 Jan 2006

Rebecca,

We haven't formalized a badge design. Last year, a few of us just made our own.

Faro USA furnished some nice pewter pins that we wore during the show. The pins were handed out at the Faro USA booth, which "forced" us to look at their offerings, which, by the way, were quite nice. :-)

I'll see if we can arrange something with Faro USA this year.

EDITED: 16 Jan 2006 by DGL

From: Harvey only (HARVEY-ONLY) [#93]
16 Jan 2006
To: Stunt Engraver (DGL) [#92] 16 Jan 2006

I finally got home.

Here are the EE logos. One for drag engraving, one for routing, a cloor one and a b/w one.

From: Stunt Engraver (DGL) [#94]
16 Jan 2006
To: Harvey only (HARVEY-ONLY) [#93] 16 Jan 2006

Thanks Harvey.

What's a cmx file?

Show messages: 1-14 15-34 35-54 55-74 75-94 95-114 115-134 135-154 … 335-343

Full Version: ARA Las Vegas 2006 (The List)

Back to thread list | Login

© 2024 Project Beehive Forum