Full Version: ARA Las Vegas 2006 (The List)

From: Cody (BOBTNAILER) [#95]
 16 Jan 2006
To: Harvey only (HARVEY-ONLY) [#93] 16 Jan 2006

Um...for that matter, what is a "plt" file? Sorry, but I'm still getting to know all this stuff.

From: Harvey only (HARVEY-ONLY) [#96]
 16 Jan 2006
To: Cody (BOBTNAILER) [#95] 17 Jan 2006

plt is Hewlett Packard Plotter Language. Most modern engravers import this file. Corel Draw does also.

CMX is Corel Metafile Xchange, (I saved them in version 5, older version). Most graphics programs can import this file, it is native of Corel so that can import it also.

I can convert it to any format that Corel can export.

From: Zonas [#97]
 17 Jan 2006
To: Cody (BOBTNAILER) [#90] 17 Jan 2006

Is that a challenge ;-)  Are we only official members if we can do the "three cartwheels, followed by a loud "hooty whoo!"?? You know David likes a challenge...........that's why he's the "Stunt Engraver". :-) 

Zona
Zona's Engraved Creations

From: Stunt Engraver (DGL) [#98]
 17 Jan 2006
To: Zonas [#97] 17 Jan 2006

Zona,

I surely enjoy a challenge, but I'll have to admit, at this stage in my life, I'm only good for the "hooty-whoo!" :-) 

From: Awardsguy [#99]
 17 Jan 2006
To: JHayes55 [#83] 17 Jan 2006

It was the gentleman from Universal Laser Sytems. Don't know if that's your guy.

From: Cody (BOBTNAILER) [#100]
 17 Jan 2006
To: Stunt Engraver (DGL) [#98] 17 Jan 2006

I would agree.

My cartwheel-turning days are most assuredly past, and any attempt to revisit those days would be good entertainment for you, and a certain trip to the ER for me.

Maybe we should take that part out of the greeting....

From: Stunt Engraver (DGL) [#101]
 17 Jan 2006
To: Cody (BOBTNAILER) [#100] 17 Jan 2006

OK Cody,

We'll remove the cartwheel requirement.

The vote of two makes it a landslide decision. :-) 

From: Boz (CHEDDARHEAD) [#102]
 17 Jan 2006
To: ALL

"Hooty-Whoo!" Y'all. So you are already changing the salutation. Great. Here I can barely sit after insisting that we learn the new salutation so we can at least fit in with one group. I believe I am suffering from an EE injury. I never was very good at somersaults, much less be able to do a cartwheel. So I hollered "hooty-whoo!" , surveyed my landing site and let er rip. I forgot that I was a little larger than my drivers license states. So as I was entering the third cartwheel, I ran out of flight deck, pitched off the terraced hillside, and came to a crash landing 30 ft. down the embankment tangled up in a woodpile next to the firepit. Don't worry, I should be able to shuffle along by the end of February. So as I said before, we'll be the good looking couple with one of us shuffling along like Tim Conway.

EDITED: 17 Jan 2006 by CHEDDARHEAD

From: jeanettebrewer (JEANETTEBREWER2) [#103]
 17 Jan 2006
To: Stunt Engraver (DGL) [#94] 17 Jan 2006

Dave,

The kind folks at Epilog Laser have offered to provide special EE badges for everyone to put on their ARA nametags.

Wanna take them up on their offer?

From: Harvey only (HARVEY-ONLY) [#104]
 17 Jan 2006
To: jeanettebrewer (JEANETTEBREWER2) [#103] 17 Jan 2006

That sounds like a wonderful offer. They need to be big enough for even me to see. [I think I need new glasses or eyes.]

From: jeanettebrewer (JEANETTEBREWER2) [#105]
 17 Jan 2006
To: Harvey only (HARVEY-ONLY) [#104] 17 Jan 2006

Great! We'll take care of it!

Perhaps you or our fearless leader will have a better idea on how to communicate this to everyone but for now, I'll just say ...

Stop by the Epilog Laser booth (#477) to get your "EE Badge of Honor" ;-) 

I'm guessing that anyone/everyone at the Epilog booth will know where the pins/badges will be ... but if not, just look for me (the shortest one in the booth) and I'll take care of you!

From: JHayes55 [#106]
 17 Jan 2006
To: Awardsguy [#99] 22 Jan 2006

No that was not him. No matter - we are glad your here. Looking forward to meeting you at LV.

From: Stunt Engraver (DGL) [#107]
 17 Jan 2006
To: jeanettebrewer (JEANETTEBREWER2) [#103] 17 Jan 2006

Jeanette,

Sounds great. Thank you and thank you Epilog.

Not to look a gift horse in the mouth, but will we have a say in the design of the badge? I'm assuming the badge will be laser engraved. :-) 

From: UncleSteve [#108]
 17 Jan 2006
To: Stunt Engraver (DGL) [#107] 17 Jan 2006

"Tis better to look a gift horse in the mouth than suffer the OTHER end!"
:P 

From: Stunt Engraver (DGL) [#109]
 17 Jan 2006
To: UncleSteve [#108] 17 Jan 2006

Steve,

Ahhh, maybe so...but by now, Epilog knows we're a discerning crowd. :-) 

From: jeanettebrewer (JEANETTEBREWER2) [#110]
 17 Jan 2006
To: Stunt Engraver (DGL) [#107] 17 Jan 2006

Of course you'll have a say. I'll send you an email to start a dialog.

From: Stunt Engraver (DGL) [#111]
 17 Jan 2006
To: jeanettebrewer (JEANETTEBREWER2) [#110] 18 Jan 2006

Thank you Jeanette.

Prishyateit :-) 

From: Ed (EMANA) [#112]
 18 Jan 2006
To: ALL

Has anyone done the Vegas show and the one on the East Coast? How do they compare?

I am on the fence about Vegas and the East Coast show is at the end of March.

Keep in mind that I just got a free room offer in the mail from the MGM Grand so Vegas is looking mighty good right now.

Also, w/ respect to the Vegas show, do y'all go from the full Wed-Sat?

Thanks!
Ed

EDITED: 18 Jan 2006 by EMANA

From: Femur (JFEEMAN) [#113]
 18 Jan 2006
To: Stunt Engraver (DGL) [#88] 18 Jan 2006

While you are adding names to your, you might as well add mine to the mix since my business partner added hers. John Feeman from YNH Laser Graphics Co. in Lebanon, PA.

From: Stunt Engraver (DGL) [#114]
 18 Jan 2006
To: Femur (JFEEMAN) [#113] 18 Jan 2006

John,

Thank you for filling out your profile information, so completely.

I've added you to the list.

Here's the updated list of forum members, we can look forward to meeting at the ARA Show:

Peter & Kathy Vasic (Engraving Services Co.)
Harvey & Dee Lentchner (Accent on Engraving)
David Lavaneri (DGL Engraving)
Mick Eminger (Cactus Equipment)
Cody & Janna Stewart (Eternity Creations)
Joe & Toni Hayes (Graphics Galore Inc.)
Ed & Sharon Holley (Victor Valley Trophy Co.)
Jeff & Lisa Higginbotham (TrophyUSA)
A J Palik (Photon Graphics)
Rolf & Leslie (Mountain Memories)
Roy Brewer, Jeanette Brewer & Randy Allen (Engraving Concepts)
Mike Mackenzie & Treavor Hertel (CEM)
Bruce and Packy Larson (Magic Router)
Chuck Burke (American Pacific Awards)
Larry & Sandy Herman (Century Badge & Engraving, Inc.)
Russ & Martha Warrick (WarrLight Engraving)
Rob Simpson (PlayAll Awards & Engraving)
John & Alexa Montgomery (Lakeshore Engraving)
Greg Bencsik & Debbie Koehler (Bux-Mont Awards)
Zona & Steve Hudkins (Zona's Engraved Creations)
Garry (AAA Awards & Embroidery)
Diane & Rob Bosworth (ACCESS Business Solutions, Inc.)
Rebecca Leedy & John Feeman (YNH Laser Graphics Company)

EDITED: 18 Jan 2006 by DGL

Show messages:  1-14  …  35-54  55-74  75-94  95-114  115-134  135-154  155-174  …  335-343

Back to thread list | Login

© 2025 Project Beehive Forum