Full Version: Print directly to engraver?

From: varn (VARNCO) [#1]
 2 Mar 2006
To: ALL

I am engraving, using Dr. Engrave, but thought that maybe I could just print directly from Corel Draw?

I'm on a Roland PNC-2100 Rotary Engraver.

Also, I am considering getting a EGX-300... anything good/bad about that model?

Thanks.


From: Rodney Gold (RODNEY_GOLD) [#2]
 2 Mar 2006
To: varn (VARNCO) [#1] 2 Mar 2006

There is a corel / windows driver on www.rolanddga.com under support. Look under legacy products for the pnc 2300a drivers etc and the current products for egx 300 drivers , both sets of drivers should work with the 2100 - the 300 drivers will/should print from corel. When you install the 300 windows driver it lists your machine as an option.

From: varn (VARNCO) [#3]
 2 Mar 2006
To: Rodney Gold (RODNEY_GOLD) [#2] 2 Mar 2006

I saw a windows driver for 2300, and some autocad drivers, but nothing for Corel Draw.

You think the egx-300 windows xp dirver will work with the 2100 - 2300?

That would be great....I'll see if I can give it a try tonight....


From: Rodney Gold (RODNEY_GOLD) [#4]
 2 Mar 2006
To: varn (VARNCO) [#3] 5 Mar 2006

The egx 300 xp driver does work with your machine , when you intall it it comes up with a list of engravers and the 2100 is there.

From: varn (VARNCO) [#5]
 27 Apr 2006
To: Rodney Gold (RODNEY_GOLD) [#4] 27 Apr 2006

Rodney,

I finally had time to download the 300 driver, and I've tried printing but when I hit print, it just goes into the spooler and gets stuck...

Is there something particular that I need to do before sending it to the engraver?


From: Rodney Gold (RODNEY_GOLD) [#6]
 27 Apr 2006
To: varn (VARNCO) [#5] 28 Apr 2006

You need to go to printer properties and tick the box "print directly to printer" .

Back to thread list | Login

© 2024 Project Beehive Forum