Full Version: Red Letters on Stainless
From: jeff (JCHUMBLEY) [#14]
2 Aug 2006
To: laserman (MIKEMAC) [#9] 3 Aug 2006
Thats an interesting concept. I might have to give it a try. I do have some stainless and cermark.
This might sound stupid but do you just rub it over the lasered cermark and wipe it off? Is it a pretty pronounced red color?
Jeff
From: Rodney Gold (RODNEY_GOLD) [#15]
2 Aug 2006
To: ALL
SS is best etched and its not too difficult
Read this
http://www.engravingetc.org/forum/index.php?webtag=EE&msg=1144.3
From: Peter [#16]
2 Aug 2006
To: Rodney Gold (RODNEY_GOLD) [#15] 2 Aug 2006
We can etch them here in Adelaide for you, then paint fill anycolor you want :-)
Rodney Gold has been a wonderful contributor to our business success !
Thanks Rodney :-)
regards
Peter
From: Stunt Engraver (DGL) [#17]
3 Aug 2006
To: Peter [#16] 3 Aug 2006
The last question posed, in Rodney's extremely informative thread, went unanswered.
How do you deal with disposing of the waste created by the acid etching process?
From: Jim (PUZZLEHEAD) [#18]
3 Aug 2006
To: jeff (JCHUMBLEY) [#13] 3 Aug 2006
I am in the midwest, about 5-6 days UPS ground shipping away from you. I am sure there are plenty of shops within one day shipping from you who can easily do a job like this. DGL could certainly do it and also Quality One Engravers does work like this.
From: UncleSteve [#19]
3 Aug 2006
To: Jim (PUZZLEHEAD) [#18] 3 Aug 2006
He is also 2-3 days away via priority mail..... and most likely at an "all you can fit" rate.
From: Peter [#20]
3 Aug 2006
To: Stunt Engraver (DGL) [#17] 3 Aug 2006
David
Good question.
a couple of ways.
1. You either decant the product into plastic drums and have a liquid waste management company dispose of it for you.
2. or you have a sophisticated waste liquid treatment plant incorporated into your production system.
Either way pricing the plates must take into consideration these costs.
regards
Peter
From: Zonas [#21]
4 Aug 2006
To: jeff (JCHUMBLEY) [#1] 4 Aug 2006
several have asked about this cutter ... here is the info from their website.
Awards and Recognition Association
Winner Best New Technology
The EH-8 Series – Long Lasting Cutters
Stainless – Brass – Aluminum – Plastic – Phenolic
The EH-8 Series represents the newest cutting tool technology. It offers vastly improved engraving performance plus increased tool longevity with tighter tolerances and cleaner cuts.
EH-8 Put to the Test
In a recent series of tests conducted for Bruce Diamond by an independent Master Engraver with over 40 years experience, the EH-8 was put through its paces by engraving a plaque of the Gettysburg Address on a piece of 304L stainless steel, one of the most difficult materials to engrave. The tool sailed through all 1,215 characters of 24-point type without resharpening! Typically, the best micrograin tool would need to be resharpened after 100 characters or less on 304L stainless.
Astounding success on other substrates
Additional tests were conducted on brass, aluminum, plastic and phenolic showing significant increases of at least 5 times greater longevity in tool life. It was also found that the quality of the work improved with better tolerances and cleaner cuts.
I have used these on 304 SS plates and do get a lot more mileage/letters out of them. I hate the mess/time of SS but love the $$. B-)
Zona
Topeka, KS
From: Rodney Gold (RODNEY_GOLD) [#22]
4 Aug 2006
To: Stunt Engraver (DGL) [#17] 5 Aug 2006
The co that supplys us the the Ferric takes the spent etch back. We just decant it into the containers it came in and they collect.
It seems to poses no ecological risk or toxicity according to this
http://wfldelearn.pssd.com/BinderView_PSS/vault/005/005325.pdf
Tho it does have recommendations as to disposal which probably vary from country to country.
I certainly wouldnt dump it down the drain or anything like that
From: Dave Jones (DAVERJ) [#23]
5 Aug 2006
To: Rodney Gold (RODNEY_GOLD) [#22] 5 Aug 2006
EDITED: 5 Aug 2006 by DAVERJ
From: Ward (STENSONENG) [#24]
5 Aug 2006
To: jeff (JCHUMBLEY) [#8] 6 Aug 2006
It seems that a firm known as Port Engravers in West Sacramento used to do
stainless a few years ago. In fact they were listed in the 2003 SBC Business to Business
yellow pages - Phone 916-371-7317. Good Luck - Ward Stenson "never to old to learn"
Show messages: 1-13 14-24