Full Version: New Groundbreaking Twist
From: Stunt Engraver (DGL) [#10]
12 Oct 2006
To: Mick [#8] 12 Oct 2006
Evidently they took you seriously.
I saw someone named "Skip Loader" back onto the bus.
From: Stunt Engraver (DGL) [#11]
12 Oct 2006
To: Dave Jones (DAVERJ) [#9] 12 Oct 2006
Could be, but I doubt we'll see very many people trying to "crane" their necks, to see what's happeened to this thread.
From: BratDawg [#12]
12 Oct 2006
To: Mick [#8] 12 Oct 2006
Steve
From: BratDawg [#13]
12 Oct 2006
To: Harvey only (HARVEY-ONLY) [#4] 12 Oct 2006
You missed the proper punctuation Harv...there should have been an "excavation" point!
Steve :-)
From: Stunt Engraver (DGL) [#14]
12 Oct 2006
To: BratDawg [#12] 12 Oct 2006
I knew it wouldn't take you long to "tread" on this topic. :-)
From: BratDawg [#15]
12 Oct 2006
To: Stunt Engraver (DGL) [#14] 12 Oct 2006
You know it's hard to pass these up....but just to make myself "clear"...I wasn't trying to be "pushy" :-)
Steve
From: Mike (MIKEN) [#16]
12 Oct 2006
To: Engravin' Dave (DATAKES) [#15] 12 Oct 2006
Back to your original and quite clever solution and post. May I suggest you hire a band for the groundbreaking. I recommend one we had back in Columbus called "Phil Dirt and the Dozers".
From: gt350ed [#17]
12 Oct 2006
To: Engravin' Dave (DATAKES) [#1] 12 Oct 2006
From: PenTrophy (PENINSULATROPHY) [#18]
12 Oct 2006
To: Engravin' Dave (DATAKES) [#1] 12 Oct 2006
Dave thanks for the view. good work!!
Now you will need more "horsepower" to " winch" this topic out of the mud. A real "crawler" if you ask me. Much longer and we will have to "trac" down the real "hitch point" to this discussion.....
We need someone to "sprocket" this topic up a knotch and "extend" it's longevity before David lowers the "boom" and "scraps" the whole "undercarraige"
EDITED: 12 Oct 2006 by PENINSULATROPHY
From: Harvey only (HARVEY-ONLY) [#19]
12 Oct 2006
To: ALL
I knew I should not have started this.
I knew I should not have started this.
I knew I should not have started this.
I knew I should not have started this.
From: PenTrophy (PENINSULATROPHY) [#20]
12 Oct 2006
To: Harvey only (HARVEY-ONLY) [#19] 12 Oct 2006
From: Engravin' Dave (DATAKES) [#21]
12 Oct 2006
To: ALL
From: Harvey only (HARVEY-ONLY) [#22]
12 Oct 2006
To: Engravin' Dave (DATAKES) [#21] 12 Oct 2006
From: Engravin' Dave (DATAKES) [#23]
12 Oct 2006
To: Harvey only (HARVEY-ONLY) [#22] 12 Oct 2006
From: Stunt Engraver (DGL) [#24]
12 Oct 2006
To: Engravin' Dave (DATAKES) [#21] 13 Oct 2006
I'm sorry. I'll have to learn not to be so quick to take Harvey's bait. :-)
Are those wooden bases on your awards?
Looks like sublimated plates. Is that the case?
From: UncleSteve [#25]
12 Oct 2006
To: Stunt Engraver (DGL) [#24] 13 Oct 2006
Now you're trying to "lure" him in again! (devil)
From: Engravin' Dave (DATAKES) [#26]
13 Oct 2006
To: Stunt Engraver (DGL) [#24] 13 Oct 2006
The bases are walnut with an ebony finish. The plates are laser-sublimated brushed aluminum.
The thing I like best (other than being paid for the work) is that our company label will be on the bottom of these and will be going to representatives from all levels of government - city, county, state and federal.
From: Stunt Engraver (DGL) [#27]
13 Oct 2006
To: Engravin' Dave (DATAKES) [#26] 13 Oct 2006
Just the type of thing that will drive your (out of the catalog) competition crazy, plus that type of job is much more fun to do.
That customer will be back, time and time again.
From: PenTrophy (PENINSULATROPHY) [#28]
13 Oct 2006
To: Engravin' Dave (DATAKES) [#1] 13 Oct 2006
From: Engravin' Dave (DATAKES) [#29]
13 Oct 2006
To: PenTrophy (PENINSULATROPHY) [#28] 13 Oct 2006
EDITED: 13 Oct 2006 by DATAKES
Show messages: 1-9 10-29 30-43