Full Version: background and cut out lab

From: Dave Jones (DAVERJ) [#8]
 24 Oct 2006
To: BrianC (INKSQUIRTER) [#7] 24 Oct 2006

What file format are you saving it as? The native PhotoPaint format should save transparency, but a format like .BMP won't.

From: Pedaler (ROYBREWER) [#9]
 24 Oct 2006
To: BrianC (INKSQUIRTER) [#7] 25 Oct 2006

Brian,

You can't save a .BMP(which is required by PhotoGraV) w/o a background. Just be sure that you set your background to white or black before exporting.

That is, Black if you are going to invert (e.g., black marble, acrylic) or white for positive (e.g., wood, light colored plastic)

From: Harvey only (HARVEY-ONLY) [#10]
 24 Oct 2006
To: Pedaler (ROYBREWER) [#9] 24 Oct 2006

If you must use PhotoGrave it will give a box. Usually simple to make that appear not to be there.

Go into the 'Object Manager' and move the picture to the bottom of the list. That will place everything else on top of it.


Show messages: All  1-7  8-10

Back to thread list | Login

© 2024 Project Beehive Forum