Full Version: New to engraving...
From: Mark (MAXMACHINE) [#43]
24 Mar 2007
To: gt350ed [#41] 24 Mar 2007
Hi again... The problem is mostly "wiggles" in the horizontal vector cut lines above 5% or 6% speed. I don't know if the X-660 has a differnt size table or components than the X-600. It is a very frustrating problem, as I cannot use the speed that the machine is capable of without producing poor quality parts.
I haven't met Mike McKensie; My rep is (or was) Chris Adams who I think worked out of Seattle.
Mark
Quote:
It sounds like your situation is unique to your machine. Your profile indicates that your ULS is a X-660. One of ours is a X-600. For whatever it's worth, we have no such issues on our X-600 or our Versalaser.
Maybe Mike McKensie can address this on-forum. He's a member here. Is he not your rep?
Ed Holley
From: gt350ed [#44]
24 Mar 2007
To: Mark (MAXMACHINE) [#43] 24 Mar 2007
BTW, his "tech" is Treavor. Treavor is very, very good. I'll put you in touch with one or both.
From: laserman (MIKEMAC) [#45]
27 Mar 2007
To: Mark (MAXMACHINE) [#43] 27 Mar 2007
Hey Mark,
We are currently working the Westec show in Los Angeles, It ends on Thursday and Friday will be a lot of catch up. We will try to diagnose the problem on Monday 4-2.
From: Mark (MAXMACHINE) [#46]
27 Mar 2007
To: laserman (MIKEMAC) [#45] 30 Mar 2007
Markrk
Hey Mark,
We are currently working the Westec show in Los Angeles, It ends on Thursday and Friday will be a lot of catch up. We will try to diagnose the problem on Monday 4-2.
CEM- Sales and Service of Universal Lasers, Versa Lasers, and Meistergram / H-square engravers.
2800 S. Main St.,Unit C
Santa Ana, Ca 92707
714-444-2385 Cem Lasers
Show messages: 1-2 3-22 23-42 43-46