Full Version: Just curious

From: LaZerDude (C_BURKE) [#46]
3 Apr 2005
To: Engravin' Dave (DATAKES) [#43] 3 Apr 2005

David,
I tried blasting these with 33psi as recommended by Photobrasive. When I turned the pressure down to 27psi, I got a much nicer etch.....

From: Harvey only (HARVEY-ONLY) [#47]
3 Apr 2005
To: LaZerDude (C_BURKE) [#46] 3 Apr 2005

Probably nothing but the standard inaccuracy of the pressure gage. Minor wear in the nozzle or venturi mixing area can make large differences also.

Show messages: 1-5 6-25 26-45 46-47