Full Version: Long Beach Awards & Custom Gift Show
From: gt350ed [#4]
11 May 2005
To: Stunt Engraver (DGL) [#3] 11 May 2005
From: Stunt Engraver (DGL) [#5]
11 May 2005
To: gt350ed [#4] 12 May 2005
Ed,
I usually attend the show on a Friday, but I encourage people to set up get-togethers on all days of the show.
The Rock Bottom Brewery/Restaurant has been the past-favorite meeting locale.
Now, between restaurants across the street from the L.B. Convention and many along Pine St., (short walking distance from the L.B. Convention Center) there are many choices.
We have plenty of time to firm up the "after-party" but here's the important part.
Here are some people you can look forward to meeting at the Long Beach NBM show:
David Lavaneri (DGL Engraving)
John Cullington (New Zealand) BTW, this will be John's first trip to the U.S.A.
Mike Mackenzie (C.E.M. ULS)
Doug Jones (Lavivrus Woodworking)
Ed & Sharon Holley (Victor Valley...)
EDITED: 11 May 2005 by DGL
From: gt350ed [#6]
12 May 2005
To: Stunt Engraver (DGL) [#5] 12 May 2005
Oh....!! You mean there's actually going to be a trade show going on at the same time that we're getting together?
Also, I'm a bit concerned about the list. I already know the majority on the list so far and I'm concerned about those others that would choose to be seen with you (us). Hmmm......maybe the list will grow so as to tip the balance.
From: Stunt Engraver (DGL) [#7]
12 May 2005
To: gt350ed [#6] 12 May 2005
Ed,
The list could get a bit convoluted, but we could put the day(s) people are planning to attend, behind their names. That way, we'd know who will be at a get-together, on a given evening.
I may end up at the show for Fri/Sat. One day is seldom enough. I'll make that decision as the show draws nearer. Like you, I never tire of seeing the familiar faces, but I'd like to meet some of the unfamilair facses as well :-)
EDITED: 12 May 2005 by DGL
Message 1281.8 was deleted
From: Stunt Engraver (DGL) [#9]
28 May 2005
To: LaZerDude (C_BURKE) [#1] 28 May 2005
Chuck,
I deleted the previous post. Posted to the wrong Chuck. :-)
You were asking about the upcoming Long Beach show and who may be attending.
Here are some people you can look forward to meeting at the Long Beach NBM show:
David Lavaneri (DGL Engraving)
John Cullington (New Zealand) BTW, this will be John's first trip to the U.S.A.
Mike Mackenzie (C.E.M. ULS)
Doug Jones (Lavivrus Woodworking)
Ed & Sharon Holley (Victor Valley...)
EDITED: 28 May 2005 by DGL
From: LaZerDude (C_BURKE) [#10]
28 May 2005
To: Stunt Engraver (DGL) [#9] 28 May 2005
David,
Add me to the list...
Chuck
From: Stunt Engraver (DGL) [#11]
28 May 2005
To: LaZerDude (C_BURKE) [#10] 28 May 2005
Here you go Chuck.
Here are some people you can look forward to meeting at the Long Beach NBM show:
David Lavaneri (DGL Engraving)
John Cullington (New Zealand) BTW, this will be John's first trip to the U.S.A.
Mike Mackenzie (C.E.M. ULS)
Doug Jones (Lavivrus Woodworking)
Ed & Sharon Holley (Victor Valley...)
Chuck Burke (American Pacific Awards)
From: LaZerDude (C_BURKE) [#12]
28 May 2005
To: Stunt Engraver (DGL) [#11] 29 May 2005
David,
Thank you.
John,
Do NOT be afraid.
Chuck
From: Stunt Engraver (DGL) [#13]
13 Jun 2005
To: ALL
Don't forget to sign up for the Long Beach show before June 29th, 2005. That will guarantee FREE admission to the exhibit hall.
If you don't pre-register, expect to pay a $10 admission fee, which isn't a back-breaker, but doesn't FREE sound like a better deal? B-)
You can pre-register online at www.nbmshows.com
From: Stunt Engraver (DGL) [#14]
14 Jun 2005
To: ALL
Located at the top of this page, click on the banner, which will take you to the NBM Shows web site.
Once you're on the site, click on the venue of your choice, which will lead you to a page where you can "Register Now!"
I'm already signed up!
See you there B-)
EDITED: 18 Jun 2005 by DGL
From: Stunt Engraver (DGL) [#15]
15 Jun 2005
To: Stunt Engraver (DGL) [#14] 15 Jun 2005
Even though they haven't made a request to be on "The List" I'm adding a few of my friends, who will be attending the show.
David Lavaneri (DGL Engraving)
John Cullington (New Zealand) BTW, this will be John's first trip to the U.S.A.
Mike Mackenzie (C.E.M. ULS)
Doug Jones (Lavivrus Woodworking)
Ed & Sharon Holley (Victor Valley...)
Chuck Burke (American Pacific Awards)
Anthony Coyne (Faro-USA)
David Curran & Richard Slater (Decco Awards)
Derek & Edith Duke (J.F. Duke)
From: LaZerDude (C_BURKE) [#16]
27 Jun 2005
To: Stunt Engraver (DGL) [#15] 27 Jun 2005
David,
We need an "official" forum night some where while we are there. Since you know the place better than the rest of us, is there a place somewhere close to the convention center we can have an EE get together?
From: Stunt Engraver (DGL) [#17]
27 Jun 2005
To: LaZerDude (C_BURKE) [#16] 27 Jun 2005
Chuck,
Meeting places are popping up almost daily. Across the street from the convention center, there's a newly-built complex with several restaurants.
The old standby has been the nearby Rock Bottom Brewery.
From: LaZerDude (C_BURKE) [#18]
27 Jun 2005
To: Stunt Engraver (DGL) [#17] 27 Jun 2005
From: Stunt Engraver (DGL) [#19]
27 Jun 2005
To: LaZerDude (C_BURKE) [#18] 27 Jun 2005
Chuck,
We haven't finalized an "official" meeting place yet. With people arriving on various days, I imagine there will be more than one opportunity.
From: gt350ed [#20]
30 Jun 2005
To: LaZerDude (C_BURKE) [#19] 30 Jun 2005
From: LaZerDude (C_BURKE) [#21]
30 Jun 2005
To: gt350ed [#20] 1 Jul 2005
Ed Holley
Hmmmmmmmmmmm seems to me there is something drastically wrong with that picture. I guess I'll have to "crash" the "incontinent-al" us party :-) [insert laugh here ]
From: Stunt Engraver (DGL) [#22]
12 Jul 2005
To: ALL
Just a little over two weeks away. :-)
From: AnthonyC [#23]
15 Jul 2005
To: Stunt Engraver (DGL) [#22] 15 Jul 2005
Hi
If anyone has forgotten to pre-register for the show let me know and I'll organize some free passes for you. This will save you the $10.00 admission that can now be spent on Beer! B-)
Best Regards
Anthony
Faro USA