Full Version: Geo. Knight DK20S - Watch Your Fingers
From: Stunt Engraver (DGL) [#117]
17 Mar 2006
To: ALL
= UPDATE =
There's nobody more weary of this topic than myself, but I have some good news to report.
Today, I visited Coast Graphic Supply, in Ventura, CA to look at a new (fresh out of the box) DK20S.
To my surprise and delight, the "new build" has been reworked to where the handlebar of the press, (in a full-open position), stands at a completey horizontal position, leaving ample clearance between itself and the upper housing of the heat press.
At this point, there is no way to impact a person's fingers, regardless of where they place their hands across the handlebar.
I commend Aaron Knight for being a man of his word, in taking this issue seriously and implementing the design changes necessary, not only to reduce his company's exposure to personal injury litigation, but in providing a much safer product to the buying public.
EDITED: 17 Mar 2006 by DGL
From: LaZerDude (C_BURKE) [#118]
19 Mar 2006
To: Harvey only (HARVEY-ONLY) [#101] 19 Mar 2006
Too keep it farther from the accelerator pedal to prevent ones foot from slipping?
Just a guess
From: GBengraver [#119]
17 Jun 2006
To: Stunt Engraver (DGL) [#111] 17 Jun 2006
I think you should add:
4. How many people who own a DK20S ever pinched thier finger? (devil)
I own one and never came close. I have other issues with the press but that is not one of them.
Greg
From: Stunt Engraver (DGL) [#120]
17 Jun 2006
To: GBengraver [#119] 17 Jun 2006
A few, is too many.
Now that Geo. Knight has changed the design of the press, the answer will be the correct one:
Zero.
From: logojohn [#121]
17 Jun 2006
To: Stunt Engraver (DGL) [#120] 17 Jun 2006
Would the DC16 be more flexible? It has several attachments you can add later like mugs, inside plates, caps, etc. The list price is actually less than the DK20.
http://www.heatpress.net/pdf/dc.pdf
We have a small 9x12 hobby which does do a good job on a lot of things but I see the need to upgrade in size down the road. The way things happen around here it could be next year or next week depending on what comes up.
If you order a DK20 now from a dealer, is there any way to be sure you are getting the new model?
'
EDITED: 17 Jun 2006 by LOGOJOHN
From: Stunt Engraver (DGL) [#122]
17 Jun 2006
To: logojohn [#121] 20 Jun 2006
John,
That's a good question, since some of the (new) older presses may still be in circulation.
If it's one of the "new build", the handle, in full open position, will be parallel to the bed of the press.
Older builds were random. Some had sufficient space between the handle and housing and some had little to none.
From: Harvey only (HARVEY-ONLY) [#123]
17 Jun 2006
To: logojohn [#121] 20 Jun 2006
Show messages: 1-16 … 57-76 77-96 97-116 117-123