Full Version: Tips and ideas for lasering - as promised
From: Rodney Gold (RODNEY_GOLD) [#9]
16 Nov 2006
To: ABH (BACHI) [#8] 17 Nov 2006
You could cast these using resin mixed with about 50% bronze powder , but would need a mould for each one , fairly easy to do with a laser tho.
You can also engrave acrylic and give it a faux bronze look with paints/inkls which will probably be the easiest.
There used to be an article on laserpro's USA site explaining EXACTLY how to do this , but it seems laserprousa.com no longer exists - google Faux bronze for some alternative "Recipes"
From: Dave Jones (DAVERJ) [#10]
17 Nov 2006
To: Rodney Gold (RODNEY_GOLD) [#9] 17 Nov 2006
They changed the website to http://www.laserproi.com
Here is their projects page:
http://www.laserproi.com/en/engr_showcase_main.php
I don't know if they have the same projects or instructions there as the other site though.
From: MR C (MOSHE) [#11]
20 Nov 2006
To: Dave Jones (DAVERJ) [#10] 20 Nov 2006
thanks for your answers. I dont find the project on Laserpros website.
Also, where can I find bronze powder?