Full Version: ARA Las Vegas 2006 (The List)

From: Cody (BOBTNAILER) [#10]
2 Jan 2006
To: joyce (JLADY) [#9] 2 Jan 2006

Joyce,

My wife and I would love to take you up on that offer! It's always good to get out to someone else's shop to see how they do things...especially for newbies like us!

Cody & Janna Stewart
Eternity Creations
Sulphur Springs, TX

From: Stunt Engraver (DGL) [#11]
2 Jan 2006
To: joyce (JLADY) [#9] 2 Jan 2006

Joyce,

Thanks for the invite. I'd love to see your shop, as I'm sure would others.

Although we may decide on a "prime" night for the get-together, it's safe to say you'll be able to meet some of our members at Quark's, any evening, after the trade show floor closes.

From: Lisa (TROPHYUSA) [#12]
2 Jan 2006
To: ALL

We just made our reservations! So my husband Jeff and I will definitely be in Vegas this time after a much regretted 2-year absence and look forward to seeing everyone at the show and maybe Quarks too. We're flying in on Wednesday and heading home on Monday. This will be Jeff's first exposure to THE awards show. Right now he is just an unpaid partner in my business working a "real" fulltime job but I hope he'll be able to drop it and join me full-time soon. This was my first year of bringing the business into my home after 5 years in a retail location and it was a HUGE success. Now we're making plans of building a shop

While in Vegas, we made reservations to see "O" and we also want to go to the Canyon so it will be a busy few days! I also love the idea of visiting your store, Joyce, if we can fit it in!

I'm so excited! :-)

From: Stunt Engraver (DGL) [#13]
2 Jan 2006
To: Lisa (TROPHYUSA) [#12] 2 Jan 2006

Lisa,

We're looking forward to seeing you again and meeting Jeff for the first time.

Here's a list of forum members, we can look forward to meeting at the ARA Show:

Peter & Kathy Vasic (Engraving Services Co.)
Harvey & Dee Lentchner (Accent on Engraving)
David Lavaneri (DGL Engraving)
Mick Eminger (Cactus Equipment)
Cody & Janna Stewart (Eternity Creations)
Joe & Toni Hayes (Graphics Galore Inc.)
Ed & Sharon Holley (Victor Valley Trophy Co.)
Lisa & Jeff Higginbotham (TrophyUSA)

From: gt350ed [#14]
2 Jan 2006
To: joyce (JLADY) [#9] 2 Jan 2006

We would also like to come by your place for a visit. We almost stopped by there last year but got side-tracked. You better be careful. You might get enough interest from the forum attendees that a party might break out. B-)

From: old man (OLDMAN) [#15]
2 Jan 2006
To: Stunt Engraver (DGL) [#1] 2 Jan 2006

Save a place for me. Is the group going to meet at Quarks Bar like last year. If so what day and time??
Thanks A J Palik
Photon Graphics

From: Stunt Engraver (DGL) [#16]
2 Jan 2006
To: old man (OLDMAN) [#15] 2 Jan 2006

AJ,

We'll get together at Quark's, but the date and time will have to be determined.

In the meantime, we'll add your name to the list of those we hope to meet up with during the show.

Here's a list of forum members, we can look forward to meeting at the ARA Show:

Peter & Kathy Vasic (Engraving Services Co.)
Harvey & Dee Lentchner (Accent on Engraving)
David Lavaneri (DGL Engraving)
Mick Eminger (Cactus Equipment)
Cody & Janna Stewart (Eternity Creations)
Joe & Toni Hayes (Graphics Galore Inc.)
Ed & Sharon Holley (Victor Valley Trophy Co.)
Lisa & Jeff Higginbotham (TrophyUSA)
A J Palik (Photon Graphics)

From: Rolf (RJB2108) [#17]
2 Jan 2006
To: Stunt Engraver (DGL) [#16] 2 Jan 2006

Hello David,
Would you please add Leslie and me to your list?
We are already sooooo exited about going !!!!!
Thank you
Rolf (Mountain Memories)

From: Stunt Engraver (DGL) [#18]
2 Jan 2006
To: Rolf (RJB2108) [#17] 3 Jan 2006

Rolf,

Knowing what a good time you had last year, I should have put your name much closer to the top of the list.

It's OK. We'll squeeze you in. :-)

Here's a list of forum members, we can look forward to meeting at the ARA Show:

Peter & Kathy Vasic (Engraving Services Co.)
Harvey & Dee Lentchner (Accent on Engraving)
David Lavaneri (DGL Engraving)
Mick Eminger (Cactus Equipment)
Cody & Janna Stewart (Eternity Creations)
Joe & Toni Hayes (Graphics Galore Inc.)
Ed & Sharon Holley (Victor Valley Trophy Co.)
Jeff & Lisa Higginbotham (TrophyUSA)
A J Palik (Photon Graphics)
Rolf & Leslie (Mountain Memories)

EDITED: 2 Jan 2006 by DGL

From: Rolf (RJB2108) [#19]
3 Jan 2006
To: Stunt Engraver (DGL) [#18] 3 Jan 2006

Thank's David,
Looking forward to seing you and everyone else that is able to go.
Rolf

From: Cody (BOBTNAILER) [#20]
3 Jan 2006
To: Stunt Engraver (DGL) [#18] 3 Jan 2006

David,

There was some talk last year about a separate nametag for EE members to wear...something that would let us easily recognize one another on the show floor.

Have you given any thought to a design for this year? I would think something with the EE website logo would be pretty nice.

Your thoughts?

Cody

From: Stunt Engraver (DGL) [#21]
3 Jan 2006
To: Cody (BOBTNAILER) [#20] 3 Jan 2006

Cody,

Last year, a few of us made our own namebadges, but we didn't have specific guidelines for a design.

I like the idea of namebadges with the new logo.

From: jbrewer (JEANETTEBREWER) [#22]
3 Jan 2006
To: Stunt Engraver (DGL) [#18] 3 Jan 2006

Add us, please!

Roy Brewer
Jeanette Brewer
Randy Allen

From: Stunt Engraver (DGL) [#23]
3 Jan 2006
To: jbrewer (JEANETTEBREWER) [#22] 4 Jan 2006

My pleasure. :-)

Here's a list of forum members, we can look forward to meeting at the ARA Show:

Peter & Kathy Vasic (Engraving Services Co.)
Harvey & Dee Lentchner (Accent on Engraving)
David Lavaneri (DGL Engraving)
Mick Eminger (Cactus Equipment)
Cody & Janna Stewart (Eternity Creations)
Joe & Toni Hayes (Graphics Galore Inc.)
Ed & Sharon Holley (Victor Valley Trophy Co.)
Jeff & Lisa Higginbotham (TrophyUSA)
A J Palik (Photon Graphics)
Rolf & Leslie (Mountain Memories)
Roy Brewer, Jeanette Brewer & Randy Allen (Engraving Concepts)

From: Cody (BOBTNAILER) [#24]
3 Jan 2006
To: Stunt Engraver (DGL) [#21] 3 Jan 2006

Do you have a vector file of the EE logo that's on this page? If so, I think that would be a wonderful way to recognize each other.

...it beats the way dogs do it...

From: Harvey only (HARVEY-ONLY) [#25]
3 Jan 2006
To: Cody (BOBTNAILER) [#24] 4 Jan 2006

I have a vector file of the logo, but will not be home again for at least a week. I believe I sent the complete package to David.

From: laserman (MIKEMAC) [#26]
3 Jan 2006
To: Stunt Engraver (DGL) [#8] 3 Jan 2006

David,

Of coarse we will be there hope to meet up with everyone again.

From: Stunt Engraver (DGL) [#27]
3 Jan 2006
To: laserman (MIKEMAC) [#26] 3 Jan 2006

Mike,

I forget who "we" is. You and ?

From: laserman (MIKEMAC) [#28]
3 Jan 2006
To: Stunt Engraver (DGL) [#27] 3 Jan 2006

Treavor Hertel my Tech guy

From: Stunt Engraver (DGL) [#29]
3 Jan 2006
To: laserman (MIKEMAC) [#28] 4 Jan 2006

Thank you Mike.

I had forgotten Treavor's name. I remember speaking to Treavor, at trade shows, before he signed on with your company. Very impressive!

Heck of a tech. :-)

Here's the updated list of forum members, we can look forward to meeting at the ARA Show:

EDITED: 3 Jan 2006 by DGL

Show messages: 1-9 10-29 30-49 50-69 70-89 … 330-343

Full Version: ARA Las Vegas 2006 (The List)

Back to thread list | Login

© 2024 Project Beehive Forum