Full Version: ARA Las Vegas 2006 (The List)

From: gt350ed [#14]
 2 Jan 2006
To: joyce (JLADY) [#9] 2 Jan 2006

We would also like to come by your place for a visit. We almost stopped by there last year but got side-tracked. You better be careful. You might get enough interest from the forum attendees that a party might break out. B-) 

From: old man (OLDMAN) [#15]
 2 Jan 2006
To: Stunt Engraver (DGL) [#1] 2 Jan 2006

Save a place for me. Is the group going to meet at Quarks Bar like last year. If so what day and time??
Thanks A J Palik
Photon Graphics


From: Stunt Engraver (DGL) [#16]
 2 Jan 2006
To: old man (OLDMAN) [#15] 2 Jan 2006

AJ,

We'll get together at Quark's, but the date and time will have to be determined.

In the meantime, we'll add your name to the list of those we hope to meet up with during the show.

Here's a list of forum members, we can look forward to meeting at the ARA Show:

Peter & Kathy Vasic (Engraving Services Co.)
Harvey & Dee Lentchner (Accent on Engraving)
David Lavaneri (DGL Engraving)
Mick Eminger (Cactus Equipment)
Cody & Janna Stewart (Eternity Creations)
Joe & Toni Hayes (Graphics Galore Inc.)
Ed & Sharon Holley (Victor Valley Trophy Co.)
Lisa & Jeff Higginbotham (TrophyUSA)
A J Palik (Photon Graphics)

From: Rolf (RJB2108) [#17]
 2 Jan 2006
To: Stunt Engraver (DGL) [#16] 2 Jan 2006

Hello David,
Would you please add Leslie and me to your list?
We are already sooooo exited about going !!!!!
Thank you
Rolf (Mountain Memories)


From: Stunt Engraver (DGL) [#18]
 2 Jan 2006
To: Rolf (RJB2108) [#17] 3 Jan 2006

Rolf,

Knowing what a good time you had last year, I should have put your name much closer to the top of the list.

It's OK. We'll squeeze you in. :-) 

Here's a list of forum members, we can look forward to meeting at the ARA Show:

Peter & Kathy Vasic (Engraving Services Co.)
Harvey & Dee Lentchner (Accent on Engraving)
David Lavaneri (DGL Engraving)
Mick Eminger (Cactus Equipment)
Cody & Janna Stewart (Eternity Creations)
Joe & Toni Hayes (Graphics Galore Inc.)
Ed & Sharon Holley (Victor Valley Trophy Co.)
Jeff & Lisa Higginbotham (TrophyUSA)
A J Palik (Photon Graphics)
Rolf & Leslie (Mountain Memories)

EDITED: 2 Jan 2006 by DGL


From: Rolf (RJB2108) [#19]
 3 Jan 2006
To: Stunt Engraver (DGL) [#18] 3 Jan 2006

Thank's David,
Looking forward to seing you and everyone else that is able to go.
Rolf


From: Cody (BOBTNAILER) [#20]
 3 Jan 2006
To: Stunt Engraver (DGL) [#18] 3 Jan 2006

David,

There was some talk last year about a separate nametag for EE members to wear...something that would let us easily recognize one another on the show floor.

Have you given any thought to a design for this year? I would think something with the EE website logo would be pretty nice.

Your thoughts?


Cody


From: Stunt Engraver (DGL) [#21]
 3 Jan 2006
To: Cody (BOBTNAILER) [#20] 3 Jan 2006

Cody,

Last year, a few of us made our own namebadges, but we didn't have specific guidelines for a design.

I like the idea of namebadges with the new logo.

From: jbrewer (JEANETTEBREWER) [#22]
 3 Jan 2006
To: Stunt Engraver (DGL) [#18] 3 Jan 2006

Add us, please!

Roy Brewer
Jeanette Brewer
Randy Allen


From: Stunt Engraver (DGL) [#23]
 3 Jan 2006
To: jbrewer (JEANETTEBREWER) [#22] 4 Jan 2006

My pleasure. :-) 

Here's a list of forum members, we can look forward to meeting at the ARA Show:

Peter & Kathy Vasic (Engraving Services Co.)
Harvey & Dee Lentchner (Accent on Engraving)
David Lavaneri (DGL Engraving)
Mick Eminger (Cactus Equipment)
Cody & Janna Stewart (Eternity Creations)
Joe & Toni Hayes (Graphics Galore Inc.)
Ed & Sharon Holley (Victor Valley Trophy Co.)
Jeff & Lisa Higginbotham (TrophyUSA)
A J Palik (Photon Graphics)
Rolf & Leslie (Mountain Memories)
Roy Brewer, Jeanette Brewer & Randy Allen (Engraving Concepts)

From: Cody (BOBTNAILER) [#24]
 3 Jan 2006
To: Stunt Engraver (DGL) [#21] 3 Jan 2006

Do you have a vector file of the EE logo that's on this page? If so, I think that would be a wonderful way to recognize each other.

...it beats the way dogs do it...


From: Harvey only (HARVEY-ONLY) [#25]
 3 Jan 2006
To: Cody (BOBTNAILER) [#24] 4 Jan 2006

I have a vector file of the logo, but will not be home again for at least a week. I believe I sent the complete package to David.

From: laserman (MIKEMAC) [#26]
 3 Jan 2006
To: Stunt Engraver (DGL) [#8] 3 Jan 2006

David,

Of coarse we will be there hope to meet up with everyone again.


From: Stunt Engraver (DGL) [#27]
 3 Jan 2006
To: laserman (MIKEMAC) [#26] 3 Jan 2006

Mike,

I forget who "we" is. You and ?

From: laserman (MIKEMAC) [#28]
 3 Jan 2006
To: Stunt Engraver (DGL) [#27] 3 Jan 2006

Treavor Hertel my Tech guy

From: Stunt Engraver (DGL) [#29]
 3 Jan 2006
To: laserman (MIKEMAC) [#28] 4 Jan 2006

Thank you Mike.

I had forgotten Treavor's name. I remember speaking to Treavor, at trade shows, before he signed on with your company. Very impressive!

Heck of a tech. :-) 

Here's the updated list of forum members, we can look forward to meeting at the ARA Show:

Peter & Kathy Vasic (Engraving Services Co.)
Harvey & Dee Lentchner (Accent on Engraving)
David Lavaneri (DGL Engraving)
Mick Eminger (Cactus Equipment)
Cody & Janna Stewart (Eternity Creations)
Joe & Toni Hayes (Graphics Galore Inc.)
Ed & Sharon Holley (Victor Valley Trophy Co.)
Jeff & Lisa Higginbotham (TrophyUSA)
A J Palik (Photon Graphics)
Rolf & Leslie (Mountain Memories)
Roy Brewer, Jeanette Brewer & Randy Allen (Engraving Concepts)
Mike Mackenzie & Treavor Hertel (CEM)

EDITED: 3 Jan 2006 by DGL


From: Stunt Engraver (DGL) [#30]
 3 Jan 2006
To: Cody (BOBTNAILER) [#24] 4 Jan 2006

Cody,

This is embarrassing.

Harvey did send the full compliment of EE logo formats to me, but I'm not finding them on my computer. :-$ 

From: swede (BRUCE_LARSON) [#31]
 3 Jan 2006
To: ALL

Last year we were too new and overwhelmed by the show that we did not get to meet anyone. This year will be different (although my checkbook may not survive--again).
Add us in, Bruce and Packy Larson.


From: Stunt Engraver (DGL) [#32]
 3 Jan 2006
To: swede (BRUCE_LARSON) [#31] 4 Jan 2006

Bruce,

Please don't be bashful. All of us were once "too new" and I'm sure some of us are still overwhelmed by the show. :-) 

Is there a company name you would like to appear next to your names?

Here's the updated list of forum members, we can look forward to meeting at the ARA Show:

Peter & Kathy Vasic (Engraving Services Co.)
Harvey & Dee Lentchner (Accent on Engraving)
David Lavaneri (DGL Engraving)
Mick Eminger (Cactus Equipment)
Cody & Janna Stewart (Eternity Creations)
Joe & Toni Hayes (Graphics Galore Inc.)
Ed & Sharon Holley (Victor Valley Trophy Co.)
Jeff & Lisa Higginbotham (TrophyUSA)
A J Palik (Photon Graphics)
Rolf & Leslie (Mountain Memories)
Roy Brewer, Jeanette Brewer & Randy Allen (Engraving Concepts)
Mike Mackenzie & Treavor Hertel (CEM)
Bruce and Packy Larson (Magic Router)

EDITED: 4 Jan 2006 by DGL


From: LaZerDude (C_BURKE) [#33]
 3 Jan 2006
To: Stunt Engraver (DGL) [#32] 3 Jan 2006

David,
Here is a post from Peter Vasic from the "other" Vegas thread.....

quote:
Bright light city gonna set my soul,
Gonna set my soul on fire...........

Viva Las Vegas !!!!!!!!

:D  :D  :-) 


If Peter is going to sing. I'm not coming. :D (insert laugh here) otherwise put me on the list..... and may I suggest Quarks on Friday the 3rd?

Show messages:  1-13  14-33  34-53  54-73  74-93  …  334-343

Back to thread list | Login

© 2024 Project Beehive Forum