Full Version: ARA Las Vegas 2006 (The List)
From: Stunt Engraver (DGL) [#41]
4 Jan 2006
To: Russ (MEATSHAKE) [#40] 6 Jan 2006
Hmmm...pardon me for not asking what that handle means. :-)
In what capacity might you be working the show, if I may ask?
In any event, here's the updated list of forum members, we can look forward to meeting at the ARA Show:
Peter & Kathy Vasic (Engraving Services Co.)
Harvey & Dee Lentchner (Accent on Engraving)
David Lavaneri (DGL Engraving)
Mick Eminger (Cactus Equipment)
Cody & Janna Stewart (Eternity Creations)
Joe & Toni Hayes (Graphics Galore Inc.)
Ed & Sharon Holley (Victor Valley Trophy Co.)
Jeff & Lisa Higginbotham (TrophyUSA)
A J Palik (Photon Graphics)
Rolf & Leslie (Mountain Memories)
Roy Brewer, Jeanette Brewer & Randy Allen (Engraving Concepts)
Mike Mackenzie & Treavor Hertel (CEM)
Bruce and Packy Larson
Chuck Burke (American Pacific Awards)
Larry & Sandy Herman (Century Badge & Engraving, Inc.)
Russ & Martha Warrick (WarrLight Engraving)
From: Engravin' Dave (DATAKES) [#42]
4 Jan 2006
To: Russ (MEATSHAKE) [#40] 6 Jan 2006
Russ,
Welcome to Engraving Etc. You will find this group to be just as fun and friendly as the folks at the Cutting Edge. If your not careful you may learn a thing or two. I certainly have.
:D
EDITED: 4 Jan 2006 by DATAKES
From: John (JOHNRMONTG) [#43]
5 Jan 2006
To: Stunt Engraver (DGL) [#21] 5 Jan 2006
David ... as you no doubt remember, Anothony, formerly with Farro USA, generously provided us with beautiful pins that many of us lucky participants wore. I don't know if they would still be available or not but that worked out really well for me and I am sure the others..(even after working on the design and finally making a unique badge for the event!) that ultimately I liked a lot better and was very noticable to all that recognized them.
What do you think?
From: Mick [#44]
5 Jan 2006
To: John (JOHNRMONTG) [#43] 5 Jan 2006
From: John (JOHNRMONTG) [#45]
5 Jan 2006
To: Mick [#44] 6 Jan 2006
From: Stunt Engraver (DGL) [#46]
5 Jan 2006
To: John (JOHNRMONTG) [#43] 5 Jan 2006
John,
Yes, I remember the pins. Other than a nice way to recognize fellow EE members at the show, the pins made a nice commemorative piece.
I'll look into it.
EDITED: 6 Jan 2006 by DGL
From: Engravin' Dave (DATAKES) [#47]
5 Jan 2006
To: Mick [#44] 6 Jan 2006
From: Stunt Engraver (DGL) [#48]
6 Jan 2006
To: John (JOHNRMONTG) [#43] 6 Jan 2006
John,
I'm assuming that you're attending the ARA show.
Naturally, "The List" is for entertainment purposes only, and doesn't represent a binding commitment, but would you like me to add your name to the list? :-)
EDITED: 6 Jan 2006 by DGL
From: Rob (AWARDZZ) [#49]
6 Jan 2006
To: ALL
North East Ohio will be there!!!!
Rob Simpson
PlayAll Awards & Engraving
Ashtabula, OH
(on the snowy southern shores of Lake Erie)
From: LaZerDude (C_BURKE) [#50]
6 Jan 2006
To: John (JOHNRMONTG) [#43] 6 Jan 2006
John,
I still have my pin from last year. I'll be wearing it this year. Have you decided yet if you can make it?
From: Stunt Engraver (DGL) [#51]
6 Jan 2006
To: Rob (AWARDZZ) [#49] 7 Jan 2006
Happy to hear you'll be at the show.
Here's the updated list of forum members, we can look forward to meeting at the ARA Show:
Peter & Kathy Vasic (Engraving Services Co.)
Harvey & Dee Lentchner (Accent on Engraving)
David Lavaneri (DGL Engraving)
Mick Eminger (Cactus Equipment)
Cody & Janna Stewart (Eternity Creations)
Joe & Toni Hayes (Graphics Galore Inc.)
Ed & Sharon Holley (Victor Valley Trophy Co.)
Jeff & Lisa Higginbotham (TrophyUSA)
A J Palik (Photon Graphics)
Rolf & Leslie (Mountain Memories)
Roy Brewer, Jeanette Brewer & Randy Allen (Engraving Concepts)
Mike Mackenzie & Treavor Hertel (CEM)
Bruce and Packy Larson
Chuck Burke (American Pacific Awards)
Larry & Sandy Herman (Century Badge & Engraving, Inc.)
Russ & Martha Warrick (WarrLight Engraving)
Rob Simpson (PlayAll Awards & Engraving)
From: John (JOHNRMONTG) [#52]
6 Jan 2006
To: Stunt Engraver (DGL) [#48] 6 Jan 2006
From: Stunt Engraver (DGL) [#53]
6 Jan 2006
To: John (JOHNRMONTG) [#52] 6 Jan 2006
I understand completely. It's not always easy to get away for the show.
We'll put you down as a definite maybe. :-)
Here's the updated list of forum members, we can look forward to meeting at the ARA Show:
Peter & Kathy Vasic (Engraving Services Co.)
Harvey & Dee Lentchner (Accent on Engraving)
David Lavaneri (DGL Engraving)
Mick Eminger (Cactus Equipment)
Cody & Janna Stewart (Eternity Creations)
Joe & Toni Hayes (Graphics Galore Inc.)
Ed & Sharon Holley (Victor Valley Trophy Co.)
Jeff & Lisa Higginbotham (TrophyUSA)
A J Palik (Photon Graphics)
Rolf & Leslie (Mountain Memories)
Roy Brewer, Jeanette Brewer & Randy Allen (Engraving Concepts)
Mike Mackenzie & Treavor Hertel (CEM)
Bruce and Packy Larson
Chuck Burke (American Pacific Awards)
Larry & Sandy Herman (Century Badge & Engraving, Inc.)
Russ & Martha Warrick (WarrLight Engraving)
Rob Simpson (PlayAll Awards & Engraving)
John & Alexa Montgomery (Lakeshore Engraving)
From: Rolf (RJB2108) [#54]
6 Jan 2006
To: ALL
I still have mine from last year too. I'll proudly wear it too !!
I mean C'mon if someone sees this pin on me, they immidiatly know that I'm part of an elite group.
From: Russ (MEATSHAKE) [#55]
6 Jan 2006
To: ALL
David,
I might be working in a booth doing sandcarving. I am also distributor for A Blast, a company that makes sandcarving equipment.
We do laser engraving and sandcarving. We do a good amount of wine bottles for the wineries in the area. We use our Epilog laser with Laser Tape on the bottles and then we sandcarve the bottles.
From: Stunt Engraver (DGL) [#56]
6 Jan 2006
To: Russ (MEATSHAKE) [#55] 7 Jan 2006
We'll keep an eye out for you.
Thank you for filling out your member profile information. The information prevented me from having to ask what area you're in.
All the best,
From: Rolf (RJB2108) [#57]
10 Jan 2006
To: Russ (MEATSHAKE) [#55] 10 Jan 2006
Russ,
What booth are you working? I like to talk to you to. I like to get a little more involved in Wine Bottles
Rolf
From: Stunt Engraver (DGL) [#58]
10 Jan 2006
To: Rolf (RJB2108) [#57] 10 Jan 2006
It's only my opinion, but I think you're already a little too involved with wine bottles. :-)
From: GBengraver [#59]
10 Jan 2006
To: Stunt Engraver (DGL) [#23] 10 Jan 2006
Count us in:
Bux-Mont Awards
Greg Bencsik
Debbie Koehler
From: Rolf (RJB2108) [#60]
10 Jan 2006
To: Stunt Engraver (DGL) [#58] 10 Jan 2006
I have bbbbeeeen invooolvveed with wine ( hic ) buuutttles foor som timmme. (hic)
;-)
(I just want to learn how to sand blasting) LOL
Show messages: 1-20 21-40 41-60 61-80 81-100 101-120 … 341-343