Full Version: Ikon Metal

From: Rodney Gold (RODNEY_GOLD) [#4]
8 Mar 2006
To: ALL

Do a google search on "cold casting",if it's the same compond , this stuff is easy to make yourself and can be used for many other things (EG , laser engrave acrylic as a female and use it to make metal male" castings. ) Requires almost no investment barring some resin and metal powder. Pour some on a level piece of acrylic , build a small dam to contain the flow let it cure and flip it out and hey prestio , you have your own version.

From: Harvey only (HARVEY-ONLY) [#5]
8 Mar 2006
To: Rodney Gold (RODNEY_GOLD) [#4] 8 Mar 2006

This sounds like a perfect item for you to do an article on.

The details will be helpful to our members, [and me].

Take some photos and I will whip up your text and photos up to a PDF file.

From: GBengraver [#6]
8 Mar 2006
To: Rodney Gold (RODNEY_GOLD) [#4] 8 Mar 2006

Rodney,
You never cease to amaze me with your depth of knowlege on any subject that comes up here.

I am always impressed and somewhat jealous. ;-)

We are very lucky to have you on board.

Thanks for taking your valuable time to chime in here.

Greg

EDITED: 8 Mar 2006 by GBENGRAVER

Show messages: All 1-3 4-6

Full Version: Ikon Metal

Back to thread list | Login

© 2024 Project Beehive Forum