Full Version: How can you convert a logo for only $9???
From: GBengraver [#8]
8 Mar 2006
To: joyce (JLADY) [#1] 8 Mar 2006
I'll add my 100% agreement to the other kudos shown here for Pete.
I can't figure out how he does it, either.
I don't think the man ever sleeps.
His quality and fast turnaround is unmatched.
On top of his good work and speed, I like the idea of keeping my money in the U.S.
Greg
From: Bieb (HABIEB) [#9]
8 Mar 2006
To: joyce (JLADY) [#1] 9 Mar 2006
Joyce, I would be willing to do them for you for say $20.00 if that sounds better. I am sure Pete won't mind me being the middle man. Heck, I might even pay him a little more than the $9.
hmmmmm maybe $9.50
:D
From: UncleSteve [#10]
8 Mar 2006
To: Harvey only (HARVEY-ONLY) [#3] 8 Mar 2006
I believe Pete's motto is "The impossible I do right away... miracles take a little longer!"
I haven't had him do any work for me yet, but the results I have seen of his work.... well, I don't want to know how an airplane flies. I only want to know it will get me where I want/need to go swiftly and safely.
From: Engravin' Dave (DATAKES) [#11]
8 Mar 2006
To: UncleSteve [#10] 9 Mar 2006
I had a 68 year old customer come in with a pen scribble drawing of an indian mascot from when she graduated from high school. She wanted me to come up with a replication of the logo to etch on some ceramic coasters for their 50th high school reunion. I did a little freehand touch up and a scan and sent it off to Pete. I told him he had 30 days to get it back to me. 24 hours and $9 later I had clean vector art. Need I say anything else? A true chicken scratch to vector conversion.
.gif)
EDITED: 8 Mar 2006 by DATAKES
From: Stunt Engraver (DGL) [#12]
8 Mar 2006
To: Engravin' Dave (DATAKES) [#11] 9 Mar 2006
Yesterday, I sent a business-card-scan of a logo to Pete. About 10 minutes later, I realized I didn't need the logo converted.
I had to send a quick "False Alarm" email. Thankfully, Pete hadn't completed the work yet. :-)
From: Dixie2 [#13]
9 Mar 2006
To: joyce (JLADY) [#1] 9 Mar 2006
Joyce..
I agree with David L... I don't know how he does it for $9, but I'm also grateful that he does!
I had a complicated logo that I traced by hand last year.. well, my hard drive crashed, and for some reason that logo didn't get backed up...
Of course, the customer came in needing their annual order ASAP.. I emailed their logo to Pete at 3:30.. then I had to leave the office on an emergency.
I was upset because I knew I wouldn't be able to send payment until the next morning, so I was going to have to put my customer off for a day...
Anyway, I sent payment at 8:30 a.m., and received my logos by 9:00 a.m.
He's amazing!!! I will never spend a day tracing a complicated logo ever again!
Dixie
From: joyce (JLADY) [#14]
9 Mar 2006
To: ALL
From: BrianC (INKSQUIRTER) [#15]
9 Mar 2006
To: joyce (JLADY) [#14] 9 Mar 2006
I think Pete would raise his prices if he thought he should and most of us would pay it, but I've seen other sites that offer said service for about the same price. I know he works pretty fast cause he did one for me in no time at all and I paid somewhat more for the fast turnaround.
Not sure how many he does in a day (or hour) but he could be making a very nice wage at the price he's charging.
He has to compete with other sites so his prices aren't way below others. Where he stands out is how quickly he can do it. Of course, after all the talk up at Vegas he may be getting busier and will adjust prices accordingly for rush orders.
Glad he's around to help the graphically challenged, like me.
From: Cody (BOBTNAILER) [#16]
9 Mar 2006
To: ALL
If Pete doesn't make you money, it's your own fault.
Someone asked if he ever slept. I dunno, but I've gotten artwork from him at all hours of the night and day.
The guy truly is amazing...I certainly can't afford to do the work he does for $9. Besides, I don't think I really WANT to.
From: Bill (ALBILLBERT2000) [#17]
10 Mar 2006
To: Stunt Engraver (DGL) [#12] 10 Mar 2006
From: JHayes55 [#18]
10 Mar 2006
To: Bill (ALBILLBERT2000) [#17] 15 May 2006
Bill - look under "links" - then "bitmap to vector conversions"
(Links is at the top of your forum page)
If you need bitmap to vector - and who does not in this business- Pete is the man.
From: Harvey only (HARVEY-ONLY) [#19]
10 Mar 2006
To: Bill (ALBILLBERT2000) [#17] 15 May 2006
That is the 'Links' in the top color bar, not 'Links of Interest'.
We have to figure out different wording for one of them, I do not like the duplication of a keyword, it can get confusing.
From: Engravin' Dave (DATAKES) [#20]
10 Mar 2006
To: Harvey only (HARVEY-ONLY) [#19] 10 Mar 2006
Harvey,
How about "Other Forums of Interest", rather than "Links of Interest"?
From: Harvey only (HARVEY-ONLY) [#21]
10 Mar 2006
To: Engravin' Dave (DATAKES) [#20] 10 Mar 2006
From: JHayes55 [#22]
10 Mar 2006
To: Harvey only (HARVEY-ONLY) [#21] 10 Mar 2006
From: Stunt Engraver (DGL) [#23]
10 Mar 2006
To: JHayes55 [#22] 10 Mar 2006
I would never say that, but I can't keep you from offering your opinion. :-)
From: GBengraver [#24]
10 Mar 2006
To: Stunt Engraver (DGL) [#23] 10 Mar 2006
How about
"May I interest you in a forum, forum" (devil)
Its been a long week.
Greg
EDITED: 10 Mar 2006 by GBENGRAVER
Show messages: 1-7 8-24