Full Version: Polishing acrylic

From: JHayes55 [#2]
 29 Mar 2006
To: James (TILER02) [#1] 29 Mar 2006

Nice bit or very useful information - thank you

From: ACJ (LADYCUTTER) [#3]
 15 Apr 2007
To: ALL

Thanks. I just ran into a similar problem and will try this fix.

From: Harvey only (HARVEY-ONLY) [#4]
 16 Apr 2007
To: James (TILER02) [#1] Unread

I use a polishing compound that is a bit coarser than Novis but finer than 150 grit. It is called Brasso. :O

If it leaves any slight buff, rarely unless you really have a long go at it, I then use Novis 2 for the final polish.

I have been using it on acrylic for over 20 years.


From: ACJ (LADYCUTTER) [#5]
 17 Apr 2007
To: ALL

Wow. The last I dealt with Brasso was in the Army polishing brass. It would never have occurred to me to use it on Acrylic. Thanks for the tip!

Show messages: All  1  2-5

Back to thread list | Login

© 2024 Project Beehive Forum