Full Version: Masking cut flat
From: Mike (MHERMAN) [#11]
6 Nov 2006
To: Dave (MT_DAVE) [#10] 6 Nov 2006
No. We use a poly vinyl film.
I would be interested to find out the laser rated film you use. It could come in handy for some of our projects.
Thank you for that information. Much appreciated.
Mike
From: Dave (MT_DAVE) [#12]
6 Nov 2006
To: Mike (MHERMAN) [#11] Unread
If it is a poly vinyl it is probably PVC based which is a definite no no. The fumes creared will damage the laser.
We use Rayzist's LazerMask. We have a 40 watt laser and use a setting of 60 speed and 100 power which according to Rayzist is overkill but since it works for us that is what we use.
Hope this helps,
Dave