Full Version: A custom piece
From: LaZerDude (C_BURKE) [#1]
25 May 2006
To: ALL
Hi Gang......
I HAD to show you this.......dimensions on this about 18" top to bottom and 30" wide.....made from solid Koa an increasingly rare tropical wood found mostly on the Big Island of Hawaii.
It was a challenge to create, but I learned a lot. The NEXT one will not be had for the price this one was had..
Anyway, thank you for letting me brag a bit.
EDITED: 26 Jul 2006 by C_BURKE
From: geebeau [#2]
25 May 2006
To: LaZerDude (C_BURKE) [#1] 25 May 2006
Impressive!!!
Sfeve
From: Stunt Engraver (DGL) [#3]
25 May 2006
To: LaZerDude (C_BURKE) [#1] 25 May 2006
Very nice, Chuckster!
You don't find that type of thing in a catalog; which are exactly the areas where you'll find your most lucrative inroads.
EDITED: 25 May 2006 by DGL
From: LaZerDude (C_BURKE) [#4]
25 May 2006
To: geebeau [#2] 25 May 2006
From: LaZerDude (C_BURKE) [#5]
25 May 2006
To: Stunt Engraver (DGL) [#3] 25 May 2006
From: UncleSteve [#6]
25 May 2006
To: LaZerDude (C_BURKE) [#1] 25 May 2006
From: Engravin' Dave (DATAKES) [#7]
25 May 2006
To: LaZerDude (C_BURKE) [#1] 25 May 2006
From: Harvey only (HARVEY-ONLY) [#8]
25 May 2006
To: LaZerDude (C_BURKE) [#4] 25 May 2006
And you were worried that you would not really get the hang on the laser. HAH.
This picture for you B-)
From: John (JOHNRMONTG) [#9]
25 May 2006
To: LaZerDude (C_BURKE) [#5] 25 May 2006
From: JHayes55 [#10]
26 May 2006
To: LaZerDude (C_BURKE) [#1] 26 May 2006
From: Funkmeister (FUNKY) [#11]
26 May 2006
To: LaZerDude (C_BURKE) [#4] 26 May 2006
The plaques is awsome. But the other thing in the picture needs a little work.
Just kidding. Really awsome DUDE B-) B-) B-) B-) B-)
From: LaZerDude (C_BURKE) [#12]
26 May 2006
To: JHayes55 [#10] 26 May 2006
Joe
Joe,
Thank you. I did the wood work.
From: LaZerDude (C_BURKE) [#13]
26 May 2006
To: Funkmeister (FUNKY) [#11] 26 May 2006
Tell me about it. ( insert laugh here)
From: LipChip [#14]
26 May 2006
To: LaZerDude (C_BURKE) [#1] 29 May 2006
From: Bob (BOBBELT) [#15]
26 May 2006
To: LaZerDude (C_BURKE) [#14] 29 May 2006
LQQks really good Chuck. I can only hope to do so well.
Bob
From: Peter [#16]
26 May 2006
To: Stunt Engraver (DGL) [#3] 26 May 2006
Hi Chuck,
Thats a really nice piece of timber. Now I think David is right with his remark. You will do well to think outside the square with your ideas.
Unique = desirable = name your price.
regards
Peter :-)
From: jeanettebrewer (JEANETTEBREWER2) [#17]
26 May 2006
To: LaZerDude (C_BURKE) [#1] 29 May 2006
Chuck,
Great job! You've come a long way since your visit to Texas!!!
From: Rob (AWARDZZ) [#18]
26 May 2006
To: ALL
Looking Good Chuck!!!... not bad for a hula guy
Rob
Ashtabula, OH
From: UCONN Dave & Lynn too (DANDL48) [#19]
27 May 2006
To: LaZerDude (C_BURKE) [#1] 29 May 2006
Chuck,
Real, real nice!! Good job my man.
Does the shape represent any of the Islands or is that how the tree grew?
Did you get my PM?
Dave
From: Cody (BOBTNAILER) [#20]
27 May 2006
To: ALL
That was Chuck in the picture??? I didn't recognize him without the skirt... ;-)
Just kidding, my friend. That was very impressive.
And to think...David Takes said that you had no talent. Just for the record, I didn't believe him.
Hehehehe...of course, he didn't really say that, but it was fun to think it. :D
Keep up the great work!!
Show messages: 1-20 21-22