Full Version: Corel X3
From: Mido [#1]
20 Jun 2006
To: ALL
EDITED: 20 Jun 2006 by MIDO
From: UCONN Dave & Lynn too (DANDL48) [#2]
20 Jun 2006
To: Mido [#1] 20 Jun 2006
From: LaZerDude (C_BURKE) [#3]
20 Jun 2006
To: Mido [#1] 20 Jun 2006
Hi Mido,
While there are many here that know more about corel than myself, I started with 12 and upgraded to X3..... there are many features that have been improved on... so I would recommend the upgrade.....if you NEED it.
Hope this helps.
From: Stunt Engraver (DGL) [#4]
20 Jun 2006
To: Mido [#1] 20 Jun 2006
Not in response to Corel, but I noticed, "Sorry my English is bad!!" is part of your signature.
Your English is fine and I would suggest removing that line from your signature.
Just a suggestion.
From: Mido [#5]
20 Jun 2006
To: Stunt Engraver (DGL) [#4] 20 Jun 2006
From: Mido [#6]
22 Jun 2006
To: ALL
From: Harvey only (HARVEY-ONLY) [#7]
22 Jun 2006
To: Mido [#6] 22 Jun 2006
Then you enable HTML at the bottom of the posting form and insert a link such as this
<img src="http://www.accentonengraving.com/accentlogo.jpg" border="0" />
Do a preview just to be sure it is correct. (That is the code for my signature logo, the software automatically adds the size dimensions.)
EDITED: 22 Jun 2006 by HARVEY-ONLY
Message 4137.8 was deleted
From: Mido [#9]
22 Jun 2006
To: Harvey only (HARVEY-ONLY) [#7] 23 Jun 2006
Is working:
Can I put link on this picture?
EDITED: 22 Jun 2006 by DGL
From: Stunt Engraver (DGL) [#10]
22 Jun 2006
To: Mido [#9] 23 Jun 2006
Feel free to make your image a live link.
Alternatively, if you enable HTML in your posts, or signature, simply typing www.becart.ba becomes a link, as you can see.
From: Mido [#11]
23 Jun 2006
To: Stunt Engraver (DGL) [#10] 23 Jun 2006
From: Stunt Engraver (DGL) [#12]
23 Jun 2006
To: Mido [#11] 23 Jun 2006
Mido,
Here's an explanation by Shaddy:
http://www.engravingetc.org/forum/index.php?webtag=EE&msg=4160.2
EDITED: 23 Jun 2006 by DGL
From: John (JOHNRMONTG) [#13]
23 Jun 2006
To: Stunt Engraver (DGL) [#12] 23 Jun 2006
From: Mido [#14]
23 Jun 2006
To: Stunt Engraver (DGL) [#12] 23 Jun 2006
EDITED: 23 Jun 2006 by MIDO
From: Harvey only (HARVEY-ONLY) [#15]
23 Jun 2006
To: John (JOHNRMONTG) [#13] 24 Jun 2006
When you check your preferences and it is shown, hit the 'Save' button anyway.
Let me know it that solves the problem.