Full Version: BallStars-Be Careful

From: precisionlaser [#11]
 23 Jun 2006
To: Harvey only (HARVEY-ONLY) [#7] 23 Jun 2006

Thanks Harvey,

You're totally correct and when they consider the logistics costs and other issues which I can't get into, they may find that the better deal would have been to simply support us...better for them in terms of reputation AND finances...just plain stupid behavior on their part, in my humble opinion.


From: Stunt Engraver (DGL) [#12]
 23 Jun 2006
To: Harvey only (HARVEY-ONLY) [#8] 23 Jun 2006

Harvey,

We'll go with your title.

Mine would have been, "This takes Ballstars." :-$ 

I wonder how John Gygnell, owner of "Oz Ballstars" the newest distributor/licensee, for Australia and New Zealand will fare?

Probably not as well as he'd like, now that Ballstars has set a bad precedent in the U.S.

That's going way "down under." :S 

Just a second.

<thumbing through NBM Long Beach flyer>

Ahh yes. Ballstars will be an exhibitor at the Long Beach Show, July 20-22, 2006.

I'll invite Ballstars to visit this thread, in order to hear both sides of the story.

If they decline, there's always a golden opportunity to have a face-to-face in Long Beach.

I'm a good listener and have plenty of time to devote to the story. :-) 

EDITED: 23 Jun 2006 by DGL


From: Stunt Engraver (DGL) [#13]
 23 Jun 2006
To: precisionlaser [#12] 23 Jun 2006

Mark,

Here's a copy of the email I just sent to Ballstars:

I'm the host/moderator of Engraving Etc. www.engravingetc.org/forum

One of our members, Mark Dickens, of Precision Laser, posted a message to my forum that Ballstars was/is engaged in unethical business practices, concerning a situation wherein Ballstars did an end-run and went direct with a major account that he'd developed.

I'm asking for your side of the story.

We only allow first-hand, factual accounts, when it comes to this type of matter.

If there's no truth to Mark's story, we'll delete the thread.

We'd appreciate a response on the forum, although a private response will be ample.

I will, of course, mention your response to the forum members.

Thank you.

David Lavaneri

===================================================

EDITED: 28 Oct 2006 by DGL


From: precisionlaser [#14]
 23 Jun 2006
To: Stunt Engraver (DGL) [#13] 23 Jun 2006

That's fine, David...I'll be interested to see how they respond.

These days with the Internet coverage of these kinds of things (think AOL, I'd like to cancel my account), companies are called to account in many public forums for less than ethical behavior. Let the fun begin...


From: Stunt Engraver (DGL) [#15]
 23 Jun 2006
To: precisionlaser [#14] 23 Jun 2006

Mark,

I just got off the phone with Andy Gensch, owner of Ballstars.

I appreciate his quick response.

Andy, as with yourself, elected not to mention the name of the account involved, although he did say that you neglected some of the facts in the matter.

Don't shoot the messenger. :-) 

1) The account was landed through an associate of yours, with which you have other dealings within the chain. Once into the deal, the stores told your associate, "The economics weren't working out."

2) Your associate approached you, with that news, in order to make the numbers work. Couldn't be done.

3) Ballstars looked at the scenario, in a number of ways, working through you, to make the numbers work. Couldn't be done.

4) In order to keep the account, as a business move, your associate decided to negotiate directly with Ballstars; with your knowledge.

Ballstars did not approach the chain directly.

5) For your initial involvement, you were offered, by Ballstars, a percentage of each sale, in perpetuity; which you turned down.

===================================================

As our Zippo distributor pointed out, right or wrong, companies dealing directly with major accounts, has become the way of the world.

Once again, according to our Zippo friend, Zippo makes that fact plain in their contracts.

Although, as you say, Ballstars, to this point, makes no such claim in writing, Andy feels you were offered fair compensation for your involvement.

From: Button (LASERCHICK) [#16]
 23 Jun 2006
To: precisionlaser [#1] 23 Jun 2006

I am with Mark on this one. I had a situation about a year ago that someone was getting prices from me, then called Ballstars and they told them they would sell wholesale to them. I contacted Ballstars and my distributor (Conde). My sales rep at Conde was furious with Ballstars and did everything he could. Ballstars made the excuse that they would only sell "a few" balls to someone for them to try the products and see about marketing it. My suggestion to Ballstars was that when someone needs wholesale products, they send the order to me, or someone else who has bought their system. I did end up finding out that they will sell as many as you order, and keep selling them to you. I upset me that I had to spend $10,000 on my system and then find out that they had started this.

Well, now this week I had someone approach me about purchasing 1000 balls. When I gave him a heck of a deal, he then called Ballstars and found that they will sell him the balls for $1.25 cheaper (per ball) than I can purchase the same amount of balls for! He is going to buy them direct from them and send them to me to make.

Ballstars is not only undercutting those who buy their systems but also their distributors! I have never been happy with any of my dealings with Ballstars and I think they are a dirty company!

What I did find out about Ballstars is:
1. They are desperate
2. They will undercut anyone
3. They will not take responsibility for their actions
4. You can't believe a word they say


From: precisionlaser [#17]
 23 Jun 2006
To: Stunt Engraver (DGL) [#15] 23 Jun 2006

David,

Andy conveniently leaves a few things out of this:

1. Ballstars has no knowledge of what I can make work and can't make work. They made the decision ON THEIR OWN that the economics just couldn't work. I asked them for an additional discount to help make this work and they refused...nothing, nada, nil. I wonder why that was? The fact is that had they extended to me end quantity pricing (a reasonable assumption given the probable volume for this account), I could have met the chain's needs. They refused.

Now, it's true that I couldn't have competed with Ballstars on the pricing, but isn't that the issue?

2. Ballstars never "worked through me". We had exactly two calls...one to tell me that they thinking about quoting on this opportunity and one to tell me that they were taking the business. The last call is where I was refused any discounts, assistance or even willingness to buy back the inventory I had on hand. I was informed "we don't do that".

3. The assertion that I was offered a percentage of the sale is a lie. I was offered $0.25 per ball for "bringing the opportunity to their attention". WOW...a whole quarter. Yes, you get a "percentage of the sale" if you divide $0.25 by the sale of a ball, but when you consider that these balls have widely varying costs, the percentage is not fixed. I suspect that if he hadn't shaded the truth and told you that I would receive a shiny quarter for allowing them to steal the business, it might not have sounded so nice. I did turn it down because it was an insult.

4. If you read my previous posts, I never said they approached the chain...

The bottom line is that once Ballstars found out that one of their distributors had closed a major sale, they wanted it for themselves. They offered NO assistance to us and even when we asked if they would buy back their own inventory (which presumably they'd sell to this account), they refused. The FACTS of this are that we made a major (for us) investment, brought and sold the concept to our associates and launched the program. We deserved to keep it. Ballstars has conducted themselves in a shameful and unethical fashion, no matter what "the way of the world" has become. I stand by each letter of each previous post.

What they don't know yet is that their ability to pull this off will require my cooperation...guess how that's gonna turn out?


From: Stunt Engraver (DGL) [#18]
 23 Jun 2006
To: precisionlaser [#17] 23 Jun 2006

Mark,

I made Ballstars aware of this thread. If they have anything to add, I'd rather see them comment directly.

From: precisionlaser [#19]
 23 Jun 2006
To: Stunt Engraver (DGL) [#18] 23 Jun 2006

That's fine...I say "bring it on". There's no way they can dress this pig up...

From: Stunt Engraver (DGL) [#20]
 23 Jun 2006
To: precisionlaser [#19] 23 Jun 2006

Mark,

I'm pretty sure there will be no direct response from Ballstars.

People will have to draw their own conclusions, which I'm sure many have.

From: precisionlaser [#21]
 23 Jun 2006
To: Stunt Engraver (DGL) [#20] 23 Jun 2006

They may not be willing to publicly own up to this behavior, but it certainly does not end the matter for me. There are additional chapters of this book to come.

From: UncleSteve [#22]
 23 Jun 2006
To: precisionlaser [#17] 23 Jun 2006

Mark,

Just out of curiosity (being nosey?), does Ballstars assign territories to their distributors or is it open season for anyone and everyone who can find a phone number?


From: precisionlaser [#23]
 23 Jun 2006
To: UncleSteve [#22] 23 Jun 2006

No territories are assigned...as far as I can tell, if all it takes is acquiring one of their presses and signing an agreement.

From: Stunt Engraver (DGL) [#24]
 23 Jun 2006
To: precisionlaser [#21] 23 Jun 2006

Mark,

The topic of industry suppliers, competing for our business, isn't a new one.

Where there used to be a line in the sand, now there is none.

We look forward to periodic updates, as you attempt to close the book on this matter.

From: bobkat [#25]
 24 Jun 2006
To: Stunt Engraver (DGL) [#24] 24 Jun 2006

Why not call for a boycott of Ballstars? Is there anyone out there with GOOD things to say about them? This forum (the people) ought to be powerful enough to effect some change.

From: UCONN Dave &amp; Lynn too (DANDL48) [#26]
 24 Jun 2006
To: bobkat [#25] 24 Jun 2006

I don't think an organized boycott is legal. That's not to say that we won't be purchasing there system anytime soon. Dave

From: bobkat [#27]
 24 Jun 2006
To: UCONN Dave &amp; Lynn too (DANDL48) [#26] 25 Jun 2006

Of course organized boycotts are legal. The immigrants did it just a short time ago by not going to work or school. People boycott things all the time like "lets all not buy gas on Sunday" (stupid). It is one of the few forms of protest we still have.

From: UncleSteve [#28]
 24 Jun 2006
To: bobkat [#27] 24 Jun 2006

There is a major difference between a "general" boycott like "let's not go to work on any day with a "y" in it and boycotting a specific company.

They may NOT win the suit, but you better be ready to pay for YOUR attorney if they decide to sue for damages. Especially if you were not a direct party to the incident and just a provocateur.


From: bobkat [#29]
 24 Jun 2006
To: UncleSteve [#28] 24 Jun 2006

Show me an example of someone being sued for calling a boycott on a product, or service. Groups boycott things all the time. Right now, Jesse and Al are calling for a boycott of BP for price gouging. Christian groups call for a boycott of sponsors of TV programs they don't like. It is not illegal, and in the case of Jesse and Al (Jackson & Sharpton), it is a way to shake down these companies for money; they have been doing it for years.
A perfect example would be Bill Oreilly calling for a boycott of all French goods: if there was a lawsuit to be had, the French Govt. has plenty of money to bring the suit, and Fox news has plenty to lose.

EDITED: 24 Jun 2006 by BOBKAT


From: UncleSteve [#30]
 24 Jun 2006
To: bobkat [#29] 24 Jun 2006

Only cause we love ya and you asked:

>NORWOOD FILES LAWSUIT
>
>INDIANAPOLIS, INDIANA (March 2, 2004) -Norwood Promotional Products
>announced today that the company has filed a lawsuit in the U.S. Federal
>District Court for the Southern District of Indiana claiming violations of
>federal and state antitrust laws. The action was taken against a group of
>distributors in an effort to extinguish alleged anti-competitive activities
>conducted by named defendants that has damaged Norwood's ability to conduct
>business.
>
>CEO Tom Roller stated, "We are taking action against those distributors who
>have attempted to damage our company and to interfere with our right to do
>business. All other avenues have been exhausted. We are taking this and
>other steps to make sure that business within our industry can be conducted
>fairly and in accordance with the laws of this country."

The ball is in YOUR court now, Mr. Kat.... :P 


Show messages:  1-10  11-30  31-50  51-70  71

Back to thread list | Login

© 2024 Project Beehive Forum