Full Version: HP 4550 OEM Transfer Paper
From: John (ICTJOHN) [#29]
11 Aug 2006
To: Stunt Engraver (DGL) [#23] 11 Aug 2006
David,
I believe the paper was wrapped around the "Fuser" not the "Drum". The fuser is in the very back of the machine and is a large rubber/silicone roller that is very HOT. The coating on the roller helped allow the gummy mess from the transfer paper to come off easier. If it had wrapped around the "Imaging Drum" it would have been "Toast" and not the kind you can eat. The Imaging Drum is accessed via the front top drawer and is very sensitive to scratches & light (and is not hot).
I have only found a T-Shirt transfer paper to run thru the 4500/4550 besides plain paper. I get it from Jack at Alpha Supply, He would know of any other papers for that machine if they are available.
hth,