Full Version: LaserBuzz Yacht-Including Plans
From: Buzz [#1]
14 Aug 2006
To: ALL
I have been a little (busy) pre-occupied, but I'd like to let you know we have added some Toy Chest designs to our web site for sale. We have made them so one sale of each should pay for the package and help us pay our bills :P
I still plan to release other designs for free. For instance the new design I will be sending Harvey is a cool Yacht design, but can be a bit of a problem if you experience a thickness issue with your substrate.
All designs have been designed to use 1/8" Baltic Birch.
Check out the Yacht and a new design - Humvee.
EDITED: 16 Aug 2006 by HARVEY-ONLY
From: Brett (BHALLE) [#2]
14 Aug 2006
To: Buzz [#1] 15 Aug 2006
You continually amaze me with your designs. I would happily sign up for a subscription just to get whatever you create. Where do I send the check?
--Brett
From: UncleSteve [#3]
14 Aug 2006
To: Brett (BHALLE) [#2] 15 Aug 2006
As with most of our members, all checks should be made out to:
Central Agency for Self Help ( CASH ).... ;-)
From: Buzz [#4]
15 Aug 2006
To: Brett (BHALLE) [#2] 15 Aug 2006
Those who get our newsletters, receive whatever we offer here first. You can go to our web site and sign up. If you want to buy something we enjoy that also :-)
Thanks for the positive remarks, it is always nice to hear B-)
A&E just published my first article, since they paid me for it, now my title is Product Designer/Writer/Flunky, I'm not sure I have them in the correct order >.<
EDITED: 15 Aug 2006 by BUZZ
From: Harvey only (HARVEY-ONLY) [#5]
15 Aug 2006
To: Buzz [#1] 15 Aug 2006
http://engravingetc.org/Harvey/upload/22640YACHT_assembly.cdr
http://engravingetc.org/Harvey/upload/22648YACHT_CUT_1.cdr
http://engravingetc.org/Harvey/upload/22653YACHT_CUT_2.cdr
From: Buzz [#6]
15 Aug 2006
To: Harvey only (HARVEY-ONLY) [#5] 15 Aug 2006
From: Harvey only (HARVEY-ONLY) [#7]
15 Aug 2006
To: Buzz [#6] 15 Aug 2006
From: Buzz [#8]
16 Aug 2006
To: Harvey only (HARVEY-ONLY) [#7] 16 Aug 2006
I'm not sure anyone knows this design is available on this thread?
I think they all looked at the picture post and didn't realize we added the design later?
How do I start a thread under Laser Engraving and put the link to the design on this thread?
I just did a product design for someone in less than 15 minutes and I can't figure out this, I feel stupid. :S
From: Harvey only (HARVEY-ONLY) [#9]
16 Aug 2006
To: Buzz [#8] 16 Aug 2006
From: Dave Jones (DAVERJ) [#10]
16 Aug 2006
To: Buzz [#8] 16 Aug 2006
Tom, linking to another thread is easy. Go to the post you want to link to and in the upper right of the post you'll see either something like: "4588.8 In reply to 4588.7 " or if the post was to "ALL" then you'll just see a single number, like "4588.1".
Put your mouse over the first number and right click. Then select "Copy Link Location" if using FireFox, or "Copy Shortcut" if using IE.
Then start your new thread or go to the post you want to add the link into and then right click and select "Paste".
From: Harvey only (HARVEY-ONLY) [#11]
16 Aug 2006
To: Buzz [#1] 16 Aug 2006
Buzz
I just moved this thread to 'Templates', it belongs there. There is no advertising going on so it did not need to go into the 'Advertising' folder.
I am going to have to dig up your other freebies and put them there also.
Thanks for all of your work.
From: Buzz [#12]
16 Aug 2006
To: Harvey only (HARVEY-ONLY) [#11] 17 Aug 2006