Full Version: cannot blast thru rapid mask 3000
From: UCONN Dave & Lynn too (DANDL48) [#17]
22 Aug 2006
To: RALLYGUY (RALLYGUY1) [#15] 22 Aug 2006
Where do you get the UV covers?
Thanks,
Dave
From: RALLYGUY (RALLYGUY1) [#18]
22 Aug 2006
To: UCONN Dave & Lynn too (DANDL48) [#17] 22 Aug 2006
I believe Midwest Sign and Screen has them....Any Screen printing supply company should have something like this.
http://www.midwestsignandscreen.com/index.html
Looks like they have a location in your region...... :)
EDITED: 22 Aug 2006 by RALLYGUY1
From: Engravin' Dave (DATAKES) [#19]
22 Aug 2006
To: UCONN Dave & Lynn too (DANDL48) [#17] 22 Aug 2006
Dave,
If you light fixtures with lenses you can get UV blocking film at any hardware store and cut it to cover the lens. It is usually with the other tinting films.
After cutting to size, just open the light fixture set the film in place, then close the fixture. You are good to go.
From: RALLYGUY (RALLYGUY1) [#20]
22 Aug 2006
To: Engravin' Dave (DATAKES) [#19] 22 Aug 2006
From: UCONN Dave & Lynn too (DANDL48) [#21]
22 Aug 2006
To: RALLYGUY (RALLYGUY1) [#18] 22 Aug 2006
Thank you both!!
Dave
Show messages: 1-16 17-21