Full Version: cannot blast thru rapid mask 3000

From: Engravin' Dave (DATAKES) [#19]
22 Aug 2006
To: UCONN Dave & Lynn too (DANDL48) [#17] 22 Aug 2006

Dave,

If you light fixtures with lenses you can get UV blocking film at any hardware store and cut it to cover the lens. It is usually with the other tinting films.

After cutting to size, just open the light fixture set the film in place, then close the fixture. You are good to go.

From: RALLYGUY (RALLYGUY1) [#20]
22 Aug 2006
To: Engravin' Dave (DATAKES) [#19] 22 Aug 2006

That is also a good option.....We used to use exactly that, but the films do age and need to be replaced over time....when it was time to replace, we bought snap on covers for the bulbs.

From: UCONN Dave & Lynn too (DANDL48) [#21]
22 Aug 2006
To: RALLYGUY (RALLYGUY1) [#18] 22 Aug 2006

Brian and David,

Thank you both!!
Dave

Show messages: 1-18 19-21

Full Version: cannot blast thru rapid mask 3000

Back to thread list | Login

© 2024 Project Beehive Forum