Full Version: Vision Phoenix (SOLD)

From: JHayes55 [#1]
 14 Sep 2006
To: ALL

I have a friend who has a Vision Phoenix 12x12 for sale. The machine has less than 20 hours of use. Other than some dust from being on the shelf he says it perfect. Machine and Vision Software package - $1500.00 and you pay freight. I know nothing about this type of engraver but he suggested that if there is a Vision owner out there that loves there machines this is a real deal. Contact me from the forum and I can hook you up as he does not participate in the forum. He has taken this in on a trade and is ready to get it out of his way.

EDITED: 18 Sep 2006 by DGL

From: LipChip [#2]
 14 Sep 2006
To: JHayes55 [#1] 14 Sep 2006

I have some interest. Where is the machine located? Can you send me online photographs?

From: JHayes55 [#3]
 14 Sep 2006
To: ALL

I will do my best to get some photo's from my friend & post. If I needed another engraving machine or had more help I would never have listed this for him, it would be running in my shop. Too little time, too much to do.

From: Stunt Engraver (DGL) [#4]
 14 Sep 2006
To: ALL

This is a screamin' deal on that type of machine.

Twice as much as the person is asking, would still be a fair price.

From: UncleSteve [#5]
 14 Sep 2006
To: JHayes55 [#1] 14 Sep 2006

Joe,

Since it is "Buyer pays the freight", where is it located and what is the shipping weight?

Thanks!

From: JHayes55 [#6]
 14 Sep 2006
To: UncleSteve [#5] 15 Sep 2006

It currently is in Minesota I have no idea on freight cost but at this price it would be a good deal anywhere in the US. Vision may have the weight listed on there website.

From: John (JOHN-BEVINS) [#7]
 15 Sep 2006
To: JHayes55 [#1] 15 Sep 2006

Greetings,

I am interested in it. Can you tell me what version of the controller it has and would you mind supply the serial number from the table. I would like to call Vision and see when it was manufactured etc.

Thank you,
John

From: JHayes55 [#8]
 15 Sep 2006
To: John (JOHN-BEVINS) [#7] 15 Sep 2006

The machine sold and is on it's way to a new owner. As it turns out his current Vision 12x12 came up lame so this one should be a great help to get him back on line engraving next week.

Thanks to everyone for there interest.
If I hear of any more good deals I will be glad to post them.

Edit:
I meant for this message to go to everyone not just John.
Hey it's late in what has been a long busy day.

Thanks

EDITED: 15 Sep 2006 by JHAYES55

From: Stunt Engraver (DGL) [#9]
 15 Sep 2006
To: JHayes55 [#8] 15 Sep 2006

Joe,

We'll have to post a picture of the new owner, with a "Wanted for Theft" caption. :-) 

That's probably the best deal I've ever seen for that piece of equipment.

From: JHayes55 [#10]
 15 Sep 2006
To: Stunt Engraver (DGL) [#9] 15 Sep 2006

Yes - I believe it was a great deal. Best thing is that the fellow that sold it is happy to have it out being used instead of in his storage area. The gentleman who bought it very badly needed it since his current one is down and he is happy. He was a very nice man to talk with on the phone. I got a good feeling out of helping two people. (and an offer for lunch if we every meet up). :-) 
I did not feel so good about having to tell others (including a friend who really wanted it but was second in line) that it had sold. :-( 

From: Stunt Engraver (DGL) [#11]
 15 Sep 2006
To: JHayes55 [#10] 15 Sep 2006

Joe,

As I saw the line forming for the machine, I didn't envy you, for ultimately having to be the bearer of bad news.

Thanks for bringing that slammin' deal to our attention. :-) 

From: JHayes55 [#12]
 15 Sep 2006
To: Stunt Engraver (DGL) [#11] 15 Sep 2006

"No good deed goes unpunished"

EDITED: 15 Sep 2006 by JHAYES55

Back to thread list | Login

© 2024 Project Beehive Forum