Full Version: Corel draw - snap to intersection
From: jeff (JCHUMBLEY) [#7]
1 Oct 2006
To: Laser Image (LASER_IMAGE) [#3] 1 Oct 2006
Another way to put the objects at an exact point is to select the object and then on the left side of the Property Bar you can enter the exact x and y location of the object.
Jeff
From: bobkat [#8]
1 Oct 2006
To: Harvey only (HARVEY-ONLY) [#6] 3 Oct 2006
From: Harvey only (HARVEY-ONLY) [#9]
1 Oct 2006
To: bobkat [#8] 1 Oct 2006
From: Harvey only (HARVEY-ONLY) [#10]
3 Oct 2006
To: bobkat [#8] 3 Oct 2006
I have looked through both Corel 9 ans X3 and cannot find anything even similar to snapping sensitivity settings except a high, medium and low setting in X3.
They seem to be for the closeness to the guide before they snap.
Please enlighten me.
From: bobkat [#11]
3 Oct 2006
To: Harvey only (HARVEY-ONLY) [#10] 3 Oct 2006
From: John (ICTJOHN) [#12]
3 Oct 2006
To: bobkat [#11] 4 Oct 2006
In version 12 & 13 you can set the "Snap To Guidelines" in at least 2 different ways.
1. go to Tools - Options - Guidelines - then check the box "Snap to guidelines"
or
2. right click on your Command Line - then place a check mark beside Property Bar. When you have nothing selected, you will see an icon that has a dotted line and a triangle, click on it - that will allow you to toggle snap to guidelines ON & OFF -
it will also bring up icons for Snap to grid, and Snap to objects among a few others..............
hth,
From: bobkat [#13]
4 Oct 2006
To: John (ICTJOHN) [#12] 4 Oct 2006
Thanks John,
Who said you can't teach an old dog a new trick? :-)