Full Version: Corel draw - snap to intersection

From: bobkat [#8]
 1 Oct 2006
To: Harvey only (HARVEY-ONLY) [#6] 3 Oct 2006

Have you checked your snapping sensitivity settings? If set too low it may not snap where you want it when zoomed out.

---

From: Harvey only (HARVEY-ONLY) [#9]
 1 Oct 2006
To: bobkat [#8] 1 Oct 2006

I will when I get back to PA. Thanks

---

From: Harvey only (HARVEY-ONLY) [#10]
 3 Oct 2006
To: bobkat [#8] 3 Oct 2006

I have looked through both Corel 9 ans X3 and cannot find anything even similar to snapping sensitivity settings except a high, medium and low setting in X3.

They seem to be for the closeness to the guide before they snap.

Please enlighten me.

---

From: bobkat [#11]
 3 Oct 2006
To: Harvey only (HARVEY-ONLY) [#10] 3 Oct 2006

You are right; the settings only set how close you have to be to the snap point. In Draw 12, I can't get anything to snap to guidlines, only objects. >.< 

---

From: John (ICTJOHN) [#12]
 3 Oct 2006
To: bobkat [#11] 4 Oct 2006

bobkat,




In version 12 & 13 you can set the "Snap To Guidelines" in at least 2 different ways.

1. go to Tools - Options - Guidelines - then check the box "Snap to guidelines"

or

2. right click on your Command Line - then place a check mark beside Property Bar. When you have nothing selected, you will see an icon that has a dotted line and a triangle, click on it - that will allow you to toggle snap to guidelines ON & OFF -

it will also bring up icons for Snap to grid, and Snap to objects among a few others..............



hth,

---

From: bobkat [#13]
 4 Oct 2006
To: John (ICTJOHN) [#12] 4 Oct 2006

Thanks John,
Who said you can't teach an old dog a new trick? :-) 

---

Show messages: All  1-7  8-13

Back to thread list | Login

© 2024 Project Beehive Forum