Full Version: Help!

From: Constant [#9]
1 Oct 2006
To: BrianC (INKSQUIRTER) [#1] 1 Oct 2006

Hi Brian

Try this CDR File

Let me know

Regards Constant
:O

From: bobkat [#10]
1 Oct 2006
To: BrianC (INKSQUIRTER) [#8] 1 Oct 2006

Divide your circle into 13 segments 360/13=27.692. That is the included angle of each segment. Draw a 10" circle with a 5" vertical line extending from the center to the top. Change the centerpoint of the vertical line to the same center point as the circle, then go to ARRANGE-TRANSFORMATIONS-ROTATE Tab. Enter the angle (27.692), click "apply to duplicate" several times. Your circle is now divided into 13 equal segments.

From: BrianC (INKSQUIRTER) [#11]
1 Oct 2006
To: bobkat [#10] 1 Oct 2006

Thanks! I had all the measurements to get the angle but just couldn't git er done....a bow to you sir!

From: BrianC (INKSQUIRTER) [#12]
1 Oct 2006
To: Constant [#9] 1 Oct 2006

Thank You Constant,

Everyone was a big help.....this was something I knew how to do and forgot.....the mind is a terrible thing to waste.

From: BrianC (INKSQUIRTER) [#13]
1 Oct 2006
To: ALL

Thank You everyone for your help!

The final result attached....

Show messages: All 1-8 9-13

Full Version: Help!

Back to thread list | Login

© 2024 Project Beehive Forum