Message 5066.1 was deleted
From: Harvey only (HARVEY-ONLY) [#2]
11 Oct 2006
To: BrianC (INKSQUIRTER) [#1] 11 Oct 2006
Thanks Brian. Good info.
From: Toni (TONI56) [#3]
11 Oct 2006
To: BrianC (INKSQUIRTER) [#1] 11 Oct 2006
I have seen the chart before, I believe I may have a copy that I picked up at a trade show. We have used lighter fluid or rubbing alcohol to clean the edges of laser engraved tags. A few months ago a lady on the forum said she used the Mr. Clean Erasers, it was something she already had & she said it worked. I think their great. No oily residue from the lighter fluid, just wet the eraser with water & they work like a charm. As long as your not rubbing too aggressively. Great for white/black, red/white & blue/white
From: UncleSteve [#4]
11 Oct 2006
To: Harvey only (HARVEY-ONLY) [#2] 11 Oct 2006
Harvey,
I believe the proper (and legal) way would be to post the link to the document and NOT copy and upload the document itself...
Just to cover our moderator Jack......
From: Harvey only (HARVEY-ONLY) [#5]
11 Oct 2006
To: UncleSteve [#4] 11 Oct 2006
I did not catch that. I will have to get permission from Rowmark to have it posted here. Or if anyone has the link that would be even easier. In the past Rowmark has been extremely cooperative.
From: UncleSteve [#6]
11 Oct 2006
To: Harvey only (HARVEY-ONLY) [#5] 11 Oct 2006
Don't know if this will help but thought I would post just in case. I just ran across it while snooping the Rowmark site.
http://www.rowmark.com/MARK/techhelpdocs/working_with_sheet/CleaningRowmarkProducts.pdf
Edited to replace BrianC's file with link to same file on Romark's site
Could edit the message but wouldn't let me delete the attachment.
Sorry, Brian!!!
EDITED: 11 Oct 2006 by UNCLESTEVE