Full Version: Newing Hall to Xenetech conversion
From: JHayes55 [#4]
6 Dec 2006
To: Paul (JACKPETTY) [#3] 6 Dec 2006
Not wanting to knock anyone out of a sale especially the wonderful folks at Engraving Concepts (Brewer Sales) but ..... I would consider calling Fred Swartz at Quality One engravers - http://www.q1engravers.com/ if I wanted to talk repair on an engraving machine. I think Fred and his folks will not steer you wrong on the possibilities and pitfalls of repairing your older machine.
If I were going to have to buy a new machine and lived where you do - I would run to Engraving Concepts!!
EDITED: 6 Dec 2006 by JHAYES55
From: PenTrophy (PENINSULATROPHY) [#5]
6 Dec 2006
To: Paul (JACKPETTY) [#3] 6 Dec 2006
From: Peter [#6]
6 Dec 2006
To: JHayes55 [#4] 6 Dec 2006
I would truly consider this option. Fred is a genius in machine rejuvination and extended life enhancement. He can truly work out your machine problems.
If it can be repaired and enhanced to do what you want it to do...at thousands less than new...Fred is the person to speak to.
If Fred cant do it...it cant be done.
regards
Peter
From: Paul (JACKPETTY) [#7]
6 Dec 2006
To: Peter [#6] 8 Dec 2006
Thanks, I'm going to call Fred and discuss my options.
I appreciate the info.
(angel)
From: sroehlk (ELECTECH1) [#8]
7 Dec 2006
To: Paul (JACKPETTY) [#7] 7 Dec 2006
Can you let us know what options he gives you?
Just curious, I have an NH300 and it is still working good but you never know.
thanks
steve
From: Paul (JACKPETTY) [#9]
7 Dec 2006
To: sroehlk (ELECTECH1) [#8] 7 Dec 2006
Just talked to him today. I explained that my Domiteaux works sometimes and not others. It either locks and beeps or engraves out of step. He guestimated $400 to take the controller apart and reseat and solder everything. I didn't go any further. If I can get another year or 2 for that, I'm in.
I plan on sending it in after the first of the year as I need it now. He thinks 2-3 days on the bench is all it takes.
After I'm thru, I'll try to remember to post back with all smiles.
Thanks to all who recommended him....he certainly has me convinced he knows what he's doing.
From: JHayes55 [#10]
8 Dec 2006
To: Paul (JACKPETTY) [#9] 8 Dec 2006