Full Version: Phoenix 1212 covers
From: varn (VARNCO) [#1]
30 Dec 2006
To: ALL
Okay, so I have my 4 different types of super lube in, and I want to get into where the z axis rails/ are under the metal cover where the spindle is located. Easy, right?
So, I remove 3 screws and find that it appears other screws are hidden under the panel that covers the x axis screw. So, I take my first screw off the cover for the x axis screw, and a nut falls out. what the....
I look closer, and it appears this is holding the power chord away from the x axis screw. Now, I can't reach my fingers under the panel to put the nut back on the screw that holds the wire to the panel.
I also notice there are 6 other screws holding the panel, but it appears that there are additional "hidden" screws holding the x panel to the 2 y panel covers.
I figured this would be as easy as changing oil in a car.
Has anyone here ever taken their thin metal covers off the phoenix 1212 and able to put them back?
:-)
From: Bob (ALLSPORT) [#2]
31 Dec 2006
To: ALL