Full Version: What's the best way to handle this job?
From: cindy (ROBERTM) [#8]
11 Jan 2007
To: Mick [#6] 11 Jan 2007
Plastic is ABS and the logo has two colors black but mostly red..
Thanks Cindy
From: cindy (ROBERTM) [#9]
11 Jan 2007
To: RALLYGUY (RALLYGUY1) [#7] 11 Jan 2007
I talked to a guy that does screen printing (we both use each others services when needed) he said this type of product could not be screen printed. I will look into pad printing but do not know anyone my area that does that. I will have to check around. I will also get some samples and see how they work with the oem transfer paper. My concern would be would this type of plastic hold up to the heat press?
And how durable would this process be..
Thanks for all the help in thinking this process thru..
Cindy
From: sawdr73 [#10]
11 Jan 2007
To: cindy (ROBERTM) [#9] 11 Jan 2007
Cindy,
I might be able to help you. I do some pad printing. I think you said the boxes are black and that the logo is black and red, mostly red. That may not work out too well since the red will not show up very well on black. Then how would you separate the black in the logo from the black substrate? I am willing to give it a try if you could send me a sample box to test ( also need the art work).
I am in southwest Arkansas. Where in Mississippi?
Mickey Parker
Vital Signs
McNeil, AR 71752
mickey-parker@sbcglobal.net
From: cindy (ROBERTM) [#11]
11 Jan 2007
To: sawdr73 [#10] 11 Jan 2007
Mickey,
Thanks for the offer. You brought up some valaid points. I think I need to discuss this with my customer again and go over some details.
Will let you know if I need your offer.
Thanks Cindy
From: RALLYGUY (RALLYGUY1) [#12]
11 Jan 2007
To: cindy (ROBERTM) [#9] 11 Jan 2007
From: cindy (ROBERTM) [#13]
11 Jan 2007
To: RALLYGUY (RALLYGUY1) [#12] 11 Jan 2007
Something about running one color letting that dry and then having to run the second color letting that dry and so forth. He suggented that pad printing would probley be the best way to handle this job, and he does not offer pad printing.
I'm not sure as I personally don't do either process myself and don't know anything about the process.
Thanks Cindy
From: Engravin' Dave (DATAKES) [#14]
11 Jan 2007
To: cindy (ROBERTM) [#9] 11 Jan 2007
Cindy,
We use Mulholland Plastics in Fort Worth, TX for pad printing. They do very nice wholesale pad printing and screen printing work. They have done some very odd shaped items we have presented them with. 800-726-1445
EDITED: 11 Jan 2007 by DATAKES
From: Mick [#15]
11 Jan 2007
To: cindy (ROBERTM) [#8] 12 Jan 2007
Cindy
ABS is very easy to print using the OEM, I have only printed on white though. It will withstand the temp I use for OEM transfer.
Mick
From: cindy (ROBERTM) [#16]
12 Jan 2007
To: Mick [#15] 12 Jan 2007
Thanks for the reply. My customer will get me some samples to try with sooo we will see how it goes.
Cindy