Full Version: Acrylic and Glass Samples
From: Dee (DEENA-ONLY) [#48]
14 Feb 2007
To: AL (SUBLIAL) [#46] 14 Feb 2007
Al,
I sent you an email via the forum.
Dee
From: Button (LASERCHICK) [#49]
15 Feb 2007
To: Harvey only (HARVEY-ONLY) [#10] 15 Feb 2007
From: Harvey only (HARVEY-ONLY) [#50]
15 Feb 2007
To: Button (LASERCHICK) [#49] 15 Feb 2007
Mick mentioned the CS?3200 for about $300. Someone else told me that the current model is the 3400 also about $300.
My Konica/Minolta is a great printer for paper and transfer, but I have seen Mick's work with the Oki and the adherence is superior to the Konica. (His paper is darned good also.)
From: Mick [#51]
15 Feb 2007
To: Harvey only (HARVEY-ONLY) [#50] 15 Feb 2007
Harvey,
The new Konica-Minolta printers that use new toner technology (magicolor 2530DL) are great for all substrates other than glazed ceramics that need to be post baked. I use mine for everything other than the glazed tiles now. Really good on acrylics and other plastics.
Mick
From: Doug (JDOUG5170) [#52]
15 Feb 2007
To: Mick [#51] 15 Feb 2007
Mick...so they should be ok for my use also? Bisque tile and coasters?
Thank you
Doug
From: Mick [#53]
15 Feb 2007
To: Doug (JDOUG5170) [#52] 15 Feb 2007
From: UncleSteve [#54]
15 Feb 2007
To: Harvey only (HARVEY-ONLY) [#50] 15 Feb 2007
Show messages: 1-7 8-27 28-47 48-54