Full Version: White coating the back of acrylic
From: Harvey only (HARVEY-ONLY) [#20]
4 Mar 2007
To: AL (SUBLIAL) [#19] 4 Mar 2007
Trimming vinyl around the edge of acrylic is simple and does no damage.
The problems with doing the color transfer to acrylic are only a few big ones. The UV adhesive does not grab to acrylic well. When it hardens it leaves a bead of set adhesive around the edge. This bead is easy to trim off crystal but will scrape the acrylic and start it to lift off the acrylic. I have tested it with the Chroma products and their advice to not use it on acrylic is sound. I'll stick to OEM transfer for that.
From: Mick [#21]
4 Mar 2007
To: AL (SUBLIAL) [#19] 4 Mar 2007
From: AL (SUBLIAL) [#22]
4 Mar 2007
To: Mick [#21] 4 Mar 2007
Oh I forgot the transfers are transparent, that is why you have to do that.
Sorry my mistake.
AL La Costa
www.atttransfer.com
1-866-900-2830
Show messages: 1-19 20-22