Full Version: Locate stainless steel tags
From: Bob (BADEAUXB) [#1]
2 Mar 2007
To: ALL
From: Dave Jones (DAVERJ) [#2]
2 Mar 2007
To: Bob (BADEAUXB) [#1] 3 Mar 2007
There's a couple of stainless tags at: http://www.idplates.com/b-tagsass.html
There are more choices at McMaster Carr, but they cost more.
http://www.mcmaster.com/ -- enter 1866 in the search field.
From: basehorawards [#3]
2 Mar 2007
To: Bob (BADEAUXB) [#1] 3 Mar 2007
From: AL (SUBLIAL) [#4]
3 Mar 2007
To: Bob (BADEAUXB) [#3] 8 Mar 2007
Bob, You could join the arm forces and they will even print them for you free. B-)
Just kidding.
AL La Costa
www.atttransfer.com
1-866-900-2830
From: Zonas [#5]
4 Mar 2007
To: Bob (BADEAUXB) [#1] 8 Mar 2007
Bob, I work with a local shop that cuts my stainless steel tags with a YAG so I can have any gauge (18 or 20 being the most poular) I also use a lot of T304 and T314 with or without mirror finish. You can PM me the specs you need and I'd be happy to get a quote for you.
Zona
Zona's Engraved Creations
From: Bob (BADEAUXB) [#6]
8 Mar 2007
To: Zonas [#5] 8 Mar 2007
Zona, that sounds very interesting. I am located in Lafayette, Louisiana.
Where are you located? I am looking for 20 gauge 1x3 stainless in either 316 or 304. I am needing 200 pieces. Any help would be greatly appreciated. Thanks Bob
From: basehorawards [#7]
10 Mar 2007
To: Zonas [#5] 11 Mar 2007
Zona,
Where are you getting your stainless? I have been using Young's for 316 ss. I can get 304 locally both in 10 or 16 gage. Both are cut with a shear and not a YAG. Even though the ones I use are industrial the edge a YAG would give might be worth the additional cost.
From: Zonas [#8]
11 Mar 2007
To: basehorawards [#7] 11 Mar 2007
The company use to be called CJS Industries and I'm not sure the new name as they sold/merged with another company this past fall. One of the owners is a scuba buddy of mine. He does all my metal cutting for me. I'll check with him Monday so see if they have a website for you.
Zona
From: Zonas [#9]
18 Mar 2007
To: Bob (BADEAUXB) [#6] 2 Apr 2007
Sorry for the delay getting back to you. The cost for 200 would be $.45 each for 304 stainless, with either a 2B or a #3 finish.
Zona
Zona's Engraved Creations
From: Tony (ANTE) [#10]
19 Mar 2007
To: Bob (BADEAUXB) [#6] 2 Apr 2007
Bob,
Another source is "Engraving Specialties". You can get in contact with them by clicking on the links just above on this page then select "Publications, Engravers journal, Web links, Engraving Specialties".