Full Version: Line on photo
From: Harvey only (HARVEY-ONLY) [#13]
14 Mar 2007
To: Barbara (RGILE) [#10] 14 Mar 2007
The image obfuscated the line with the file. I will look at it this afternoon. Sorry.
[See Chuck, an example is better than an explanation.]
From: Gary (GLSHOE) [#14]
14 Mar 2007
To: ALL
From: Harvey only (HARVEY-ONLY) [#15]
14 Mar 2007
To: Barbara (RGILE) [#4] 14 Mar 2007
The width divided by 2 but not by four, so I resampled it to be two pixels less in width, that made it divisible by four. I then made the width .003" smaller in Draw, the equivalent of one pixel.
It should now work being sent to the laser.
From: Barbara (RGILE) [#16]
14 Mar 2007
To: Harvey only (HARVEY-ONLY) [#15] 14 Mar 2007
I will let you know how it works.
Thank you,
Barb :D
From: Barbara (RGILE) [#17]
15 Mar 2007
To: Barbara (RGILE) [#16] 15 Mar 2007
I still got the line in it. I give up. I scrapped the bride and put a photo of a dog instead.
It worked fine.
Thanks for trying.
Barbara
From: Harvey only (HARVEY-ONLY) [#18]
15 Mar 2007
To: Barbara (RGILE) [#17] 15 Mar 2007
Now I have no idea of what it could be. Those two tricks always solved it for me when it happened.
The only possibility left is to make the picture a little larger and powerclip it into the right size box. That takes the edge of the picture out of the printout. Corel will clip/mask to the box and not put out that part of the photo. Be sure to make the outline of the powerclip box white or the outline will engrave.
From: Barbara (RGILE) [#19]
15 Mar 2007
To: Harvey only (HARVEY-ONLY) [#18] 15 Mar 2007
The dog photo came out very nice, so I know it's the picture, I just didn't know why it got a line all of a sudden. I used it for other engravings and it worked fine.
Thanks again Harvey,
Barb
From: Gary (GLSHOE) [#20]
15 Mar 2007
To: Barbara (RGILE) [#19] 16 Mar 2007