Full Version: Engraving Etc. Where You've Got a Friend
From: Peter [#18]
20 Mar 2007
To: Dee (DEENA-ONLY) [#17] 21 Mar 2007
Dee
Ok Dee I give up..I did something wrong didnt I ....I dont know what it was,,. but from the tone of your posts lately..I know I must of...
The worst part is..I dont know what it was :<
As for Universal...it will never happen..they are satisfied with what they have. You must remember, a lot has been invested by the local distributor..and finding someone else in such a small market place is a very difficult thing. o we have to take it on the chin and put up with it.
regards
Peter
EDITED: 20 Mar 2007 by PETER
From: UncleSteve [#19]
21 Mar 2007
To: Peter [#18] 21 Mar 2007
I doubt you did anything wrong... It appears it is just your turn in the barrel.... :P
See my tagline! >.<
EDITED: 21 Mar 2007 by UNCLESTEVE
From: Harvey only (HARVEY-ONLY) [#20]
21 Mar 2007
To: Peter [#18] 21 Mar 2007
I guess Aussies do not use that brand of humor. The part that says 'you have plenty of time, don't you?', means that you really have no time at all.
It was like saying why don't you take on more of a load, you still waste a few hours sleeping. Humor when explained really stinks, but believe me it was humor only.
It is a line she uses on me when she adds more work to an already overburdened schedule.
From: Peter [#21]
21 Mar 2007
To: Harvey only (HARVEY-ONLY) [#20] 21 Mar 2007
* insert smack in the back of the head with a piece of 4x2 here* >.< How embarrasing....I am so busy that I didnt even have time to get the joke. :P
(Harvey, we do use that line here as well) :S
EDITED: 21 Mar 2007 by PETER
From: Harvey only (HARVEY-ONLY) [#22]
21 Mar 2007
To: Peter [#21] 21 Mar 2007
Now being serious, you have to take some time to smell the roses.
It is too easy to get tied up in a rush then wonder where the past two years went.
From: UncleSteve [#23]
21 Mar 2007
To: Harvey only (HARVEY-ONLY) [#22] 21 Mar 2007
From: PenTrophy (PENINSULATROPHY) [#24]
21 Mar 2007
To: Peter [#21] 21 Mar 2007
From: UncleSteve [#25]
21 Mar 2007
To: PenTrophy (PENINSULATROPHY) [#24] 21 Mar 2007
From: Peter [#26]
21 Mar 2007
To: PenTrophy (PENINSULATROPHY) [#24] 22 Mar 2007
I Know we went to Vegas last year..but I dont remember that bit ! (angel)
From: mrmanb (JAMESH) [#27]
22 Mar 2007
To: Don (HIGHDESERT) [#1] 22 Mar 2007
Hi Don,
I actually use to work in tech support over at Gravograph about 8 months ago. I recently got back in to Telecom. The thing is NH is trying to migrate away from G98. Which they have stop producing actual dongles for a while, but the G5 software sometimes work with G98. So, if they sent you a replacement g98 dongle. Then it is either used or refurbished. I would strongly recommend you ask them how long the warranty is for that dongle. If you notice any problems make sure you contact them and asked to speak to the manager of tech support. Express you concerns to them. The sales rep did exactly what your wife said he did. When I worked there after the ARA show we use to get customers all the time stating that a sales rep had promised them something and never got approval for whatever they promised. The replacement dongle they were speaking of was for the G5 software.
James
From: PenTrophy (PENINSULATROPHY) [#28]
22 Mar 2007
To: Peter [#26] 22 Mar 2007
From: Engravin' Dave (DATAKES) [#29]
22 Mar 2007
To: mrmanb (JAMESH) [#27] 22 Mar 2007
James,
How long were you with NH Tech Support? Did you specialize in software, hardware or both? Are you doing any NH side work now?
From: mrmanb (JAMESH) [#30]
22 Mar 2007
To: Engravin' Dave (DATAKES) [#29] 22 Mar 2007
From: mrmanb (JAMESH) [#31]
22 Mar 2007
To: Engravin' Dave (DATAKES) [#29] 22 Mar 2007
From: Don (HIGHDESERT) [#32]
22 Mar 2007
To: mrmanb (JAMESH) [#27] 22 Mar 2007
James,
Thank you for the info. I had to sign a Parts Exchange Form agreeing to: Electronic parts carry a 90 day warranty, Mechanical parts carry a 60 day warranty. I didn't like it after paying them $682.00 for a replacement Dongle, but I assumed the replacement was at least a new dongle. If they are trying to un-load a used or refurbished one on me for that price, (and not telling me), I'm beginning to think that maybe I'll just cancel my order and put an end to doing business with them. It's too bad as I had planned on purchasing new equiptment and supplies from them.
Thanks againg for the heads up.
Don
From: Engravin' Dave (DATAKES) [#33]
22 Mar 2007
To: mrmanb (JAMESH) [#31] 22 Mar 2007
Are you insinuating with this comment that someone called in about their Hew Hermes laser engraver not getting a dark enough logo image on the bagel they were trying to engrave? :D
From: mrmanb (JAMESH) [#34]
22 Mar 2007
To: Don (HIGHDESERT) [#32] 22 Mar 2007
From: Harvey only (HARVEY-ONLY) [#35]
22 Mar 2007
To: Engravin' Dave (DATAKES) [#33] 22 Mar 2007
More likely that they were trying to use GS98 for their Roland engraver and were having trouble.
Or they were having problems with Windows and needed tech support for Windows.
From: mrmanb (JAMESH) [#36]
22 Mar 2007
To: Engravin' Dave (DATAKES) [#33] 22 Mar 2007
EDITED: 22 Mar 2007 by JAMESH
From: Don (HIGHDESERT) [#37]
22 Mar 2007
To: mrmanb (JAMESH) [#34] 22 Mar 2007
Thanks again James,
I put in a call to the NH Tech Support guy that helped with my dongle issue but got a voice mail. I Left a message. In my message I told him that according to UPS, they have received the dongle I sent in to them for replacement, but that it has come to my attention that they may be selling used or refurbished G98 Dongles to replace the one I sent in, and that this was never disclosed to me or does it state anywhere on the Parts Exchange Form I had to sign. I told him on the voice mail that I assumed, and expected a new dongle replacement for the $682.00 they were going to charge me and that I was told I could purchase a newer program that uses a USB Dongle.
I'll wait and see what happens if they phone me back. Luckily I had the choice of not writing down my credit card info on the Faxed Parts Exchange Form. They said I could write a note on teh form asking them to phone me for the credit card info when they received the bad dongle. But if they try to pawn off a used Dongle on me, I'm not going for it. If that happens, I just hope I can get the original bad dongle back from them so I can return it to my neighbor and wash my hands of the whole NH deal.
Thanks again for the valuable information,
Don
Show messages: 1-17 18-37 38-48