Full Version: ARA shows "thank you"
From: George (GPRIVATEER) [#1]
19 Mar 2007
To: ALL
Hello All!
This is my first post to this forum, and I'm excited about being along for the ride.
My name is George Privateer, and I work for Rowmark. I had the chance to talk to many of you at the recent ARA Las Vegas and Atlantic City shows, and I just wanted to thank you all for stopping by our booth. This is my fourth year of doing shows for Rowmark, and it's really nice to see many of the same faces year after year and to be able say "hello!"
It may sound like I'm "blowin' smoke", but we really do appreicate your honest feedback, good or bad. It can only make our company and our products better.
Several of you asked about the signs in our booth, which had a Rock & Roll theme this year. They were designed by the extremely talented Jessica Heldman-Beck, who works in our Marketing Department. All of the sign files are available for free on our website under the "downloads" section (in CorelDraw format) if you want to see how she set up the files.
Again, thanks for stopping by our booth! If any of you are planning to attend the ISA show in April in Las Vegas, we will be there, so be sure to stop by again!
Thanks!
From: Stunt Engraver (DGL) [#2]
19 Mar 2007
To: George (GPRIVATEER) [#1] 19 Mar 2007
Welcome to the forum. Phil Noakes has been a friend of the forum for quite a while and we appreciate his participation when a Rowmark question arises.
Happy to have another Rowmark representative "in the house." :-)
From: Engravin' Dave (DATAKES) [#3]
19 Mar 2007
To: George (GPRIVATEER) [#1] 19 Mar 2007
George,
It may seem like I'm blowing' smoke, but I find it refreshing to know that a company that already has great products is looking for ways to make them even better.
Thanks for stopping in to the forum.
From: geebeau [#4]
19 Mar 2007
To: George (GPRIVATEER) [#1] 19 Mar 2007
Welcome!
I'm sure all of us are familiar with Rowmark and the consistent quality therein.
There's a lot to be learned here, since we all tend to be brutally honest about goods and services in the interest of helping each other be better in our chosen profession.
Steve
From: Dee (DEENA-ONLY) [#5]
19 Mar 2007
To: George (GPRIVATEER) [#1] 19 Mar 2007
George,
I'm one of those people who was fascinated by your display. I had seen it in Vegas but your booth was busy and I just looked & went on. With the traffic being so light on Friday I had a chance to really talk to one of your reps about the display. He was very informative and I enjoyed our conversation.
BTW you have great products.
Dee
From: LaZerDude (C_BURKE) [#6]
19 Mar 2007
To: George (GPRIVATEER) [#1] 19 Mar 2007
George,
Welcome aboard. It's always nice to have a manufacturer or supplier on board to answer questions.
YES! You guys did have a great booth. I think maybe it was you and I that spoke in Las Vegas, when you told me Jessica did the booth. I had to stop dead in my tracks and congratulate her on a job well done.
What a FABULOUS job showing not only the versatility of your products, but how diverse this industry can be in the many facets of production it offers.
GREAT JOB. GREAT PRODUCTS.
Thanks
From: baz (RINGROAD) [#7]
19 Mar 2007
To: LaZerDude (C_BURKE) [#6] 19 Mar 2007
Hi George welcome.
It was great sitting down with four of the staff and having a relaxing talk. All the best to a great company Baz
From: JHayes55 [#8]
19 Mar 2007
To: George (GPRIVATEER) [#1] 19 Mar 2007
George - Welcome to the forum. Much like the others who have already commented, I am glad to see a representative of another quality company participate on the forum.
We have met a few times over the last few years but you may not remember my name, but I am from the area in southern IL where Phil Nokes' mother and other family live. In fact Phil and I exchanged emails yesterday. Phil is first class in my book as well as I am sure he is in yours.
We are glad to have you as a member and hope you actively participate.
From: George (GPRIVATEER) [#9]
20 Mar 2007
To: LaZerDude (C_BURKE) [#6] 20 Mar 2007
Hi Chuck,
If I remeber correctly, you offered Jessica a job at your shop at the ARA Las Vegas show :D And while she's not available, it's been a long winter in Ohio and I think she at least gave it some thought ;-)
Thanks (again) for the kind words, and I'll send this along to Jessica.
George
From: BrianC (INKSQUIRTER) [#10]
20 Mar 2007
To: George (GPRIVATEER) [#1] 20 Mar 2007
Hi George,
I wasn't at the Atlantic City show but I attended the regional event your company put on last summer in Findlay. Although I told you guys at the event (I was the old red headed guy that forgot my camera) last year I just want to tell all the members here (again, which I have already done) how great your company was to us.
You put on a 1st class event and I encourage anyone traveling through your area to stop in and pay Rowmark a visit.
Everyone I came in contact was just terrific and very helpful with the questions we all had. Jessica is terrific with her design work.
Brian Conklin
Cutter's Edge Engraving
From: Stunt Engraver (DGL) [#11]
20 Mar 2007
To: George (GPRIVATEER) [#9] 20 Mar 2007
Do you have photos of the booth being discussed?
That way, people who weren't able to attend the trade shows will be able to appreciate Rowmark's work.
Thank you,
From: Boz (CHEDDARHEAD) [#12]
20 Mar 2007
To: ALL
Enough of all this Nice Nice. Get the rope!
Welcome to the Forum.
From: George (GPRIVATEER) [#13]
20 Mar 2007
To: Stunt Engraver (DGL) [#11] 20 Mar 2007
Hi David,
Yes, we have some photos to share.
I will post them to the Rowmark webpage in the next day or so and share the link with you all.
Thanks!
George
From: Stunt Engraver (DGL) [#14]
20 Mar 2007
To: George (GPRIVATEER) [#13] Unread
Thank you George.