Full Version: New Hermes CG-4 Cutter Grinder
From: Engravin' Dave (DATAKES) [#15]
21 Mar 2007
To: Tony (ANTE) [#12] 21 Mar 2007
Tony,
New Hermes just called back and said that the wheel is a diamond wheel. They only offer one diamond wheel and the grit number was not available. They couldn't explain the difference in the last digit of the product number.
New Hermes has two wheels that are designed for sharpening carbide cutters. One of them is made of silicon carbide (30-272-00), which is for rough grinding. The other wheel is the diamond (30-273-00), which you would be recieving with this machine.
There is also a carborundum wheel (30-271-00) available that is used for sharpening high speed steel cutters.
Are we a go on this deal?
EDITED: 21 Mar 2007 by DATAKES
From: Tony (ANTE) [#16]
21 Mar 2007
To: Stunt Engraver (DGL) [#14] 21 Mar 2007
Thank you David,
You are correct in stating that 400 grit is what I need.
I also have Hermes catalog but the number Dave Takes posted thoes not crossreferance to the one in catalog. 30-273-01 is shown in catalog.
Thank's again for all your help.
Tony
From: Tony (ANTE) [#17]
21 Mar 2007
To: Engravin' Dave (DATAKES) [#15] 21 Mar 2007
Hi Dave,
It appears that the wheel is diamond. I called local Hermes distributor and the number they have listed for diamod wheel is 30-273-01M.
The 273 part of the code should indicate as "diamond".
Anyway, have you checked into shipping charges?.
Please let me know.
Thank's
Tony
From: Engravin' Dave (DATAKES) [#18]
21 Mar 2007
To: Tony (ANTE) [#17] 21 Mar 2007
From: GBengraver [#19]
21 Mar 2007
To: Engravin' Dave (DATAKES) [#18] 21 Mar 2007
Dave,
I sent you a PM.
Greg
From: Stunt Engraver (DGL) [#20]
21 Mar 2007
To: ALL
From: gt350ed [#21]
21 Mar 2007
To: Engravin' Dave (DATAKES) [#18] 21 Mar 2007
From: Engravin' Dave (DATAKES) [#22]
21 Mar 2007
To: gt350ed [#21] 22 Mar 2007
From: Tony (ANTE) [#23]
22 Mar 2007
To: Engravin' Dave (DATAKES) [#18] 22 Mar 2007
Hello Dave,
I've sent you an e-mail. Have you got it?.
Tony
From: Engravin' Dave (DATAKES) [#24]
22 Mar 2007
To: Tony (ANTE) [#23] 22 Mar 2007
Tony,
I got your e-mail and just sent a response. Thanks!
Show messages: 1-14 15-24