Full Version: OEM Laser - License Plate

From: Carl (CSEWELL) [#17]
 25 Mar 2007
To: LaZerDude (C_BURKE) [#14] 25 Mar 2007

quote:
I just hate wasting product on experiments


Don't forget to use both sides!!!! I hope I'm NOT presenting CLTT (color laser toner transfer) as a simple and fool-proof process. If you want a confidence booster, though, do a few mouse pads!

I've spent many years in engineering R&D environments. Failures occur more often than successes. And remember this:
------------------
The most exciting phrase to hear in science, the one that heralds the most discoveries, is not "eureka" (I found it!) but "that's funny..."

--Isaac Asimov
-------------------

I got the Alder plaque right the first time and that's the only alder plaque I've done. Send me a description of your results and your process and I'll see if I can see something. Don't be afraid to press for long times 3 or 4 minutes. Most importantly, you want success. Then you can work on cycle time.

quote:
license plate....where did you get the image?


CorelDraw! Photos. Thanks to Dave Miller for pointing me in that direction. Disk 2, I think, of V12. They're probably the same or similar in X3 (I haven't looked, yet, since I JUST got X3!!!). I don't think it was in Landscapes, maybe Nature or Natural? There are a whole bunch of photos in there that will work for license plates. It takes a while to go through the photos. At least it does on my slow computer. If you need it in a hurry, I can send it to you on Monday. If you need it today, I can remotely log into my work computer and get it for you. Let me know.

EDITED: 25 Mar 2007 by CSEWELL


From: Doug (JDOUG5170) [#18]
 25 Mar 2007
To: LaZerDude (C_BURKE) [#16] 25 Mar 2007

Be careful in cleaning off the toner on a wood plaque with lacquer thinner, there is a good chance that it was finished with lacquer which will also come off with the thinner.

Doug


From: Carl (CSEWELL) [#19]
 25 Mar 2007
To: LaZerDude (C_BURKE) [#14] 25 Mar 2007

quote:
license plate....where did you get the image?


CorelDraw X3, Disk #3, Photos>Water>739047.jp2

And make sure you take a look at the Sunsets folder on that same disk.

From: LaZerDude (C_BURKE) [#20]
 25 Mar 2007
To: Carl (CSEWELL) [#19] 25 Mar 2007

Thanks. I will

Show messages: All  1-16  17-20

Back to thread list | Login

© 2024 Project Beehive Forum