Full Version: XP/Corel X3 Print lag

From: LaZerDude (C_BURKE) [#3]
 29 Mar 2007
To: BrianC (INKSQUIRTER) [#1] 29 Mar 2007

Brian,

This has happened to me on only a couple of occasions, so not enough to be a nuisance to me.

If you do not find the answer here, you might try the Corel Draw Users Group on Yahoo groups.

Good luck. Let us know how it works out.


From: Harvey only (HARVEY-ONLY) [#4]
 29 Mar 2007
To: LaZerDude (C_BURKE) [#3] 29 Mar 2007

I pretty much solved the problem bu going back to version 9. There is very little that 9 cannot do that X3 can.

From: LaZerDude (C_BURKE) [#5]
 29 Mar 2007
To: Harvey only (HARVEY-ONLY) [#4] 29 Mar 2007

quote:
I pretty much solved the problem bu going back to version 9.


That works for you "OLD" timers. ( insert laugh here)..... but for us newbies who only go back as far as 12.....it could still be a problem.

From: Harvey only (HARVEY-ONLY) [#6]
 29 Mar 2007
To: LaZerDude (C_BURKE) [#5] 29 Mar 2007

I feel that it is better than going back to version 1. Those floppies probably have fallen apart by now.

Or did I start with 3? I loved the old Page Maker far better.


From: BrianC (INKSQUIRTER) [#7]
 29 Mar 2007
To: Harvey only (HARVEY-ONLY) [#4] 29 Mar 2007

I don't think I can go back to 9.....I suppose I could re-install 9, do the layout in X3 and print with 9.

hmmm...


From: laserman (MIKEMAC) [#8]
 30 Mar 2007
To: BrianC (INKSQUIRTER) [#7] 30 Mar 2007

Brian,

Do a disk clean up clear out the temp files both the regular temp files and the internet temp files.


From: PenTrophy (PENINSULATROPHY) [#9]
 30 Mar 2007
To: BrianC (INKSQUIRTER) [#7] 30 Mar 2007

I've got Corel 5 if that helps.......&....... PageMaker 5.0

From: Mike (MIKEHUNTER) [#10]
 30 Mar 2007
To: ALL

Someone on the CorelX3 user group said that there is a problem with Draw not releasing the spooler properly after a print job. Apparently it started in version 9 or 10 and has carried on since then.

Even so, having moved from V11 to V13, the delay problem seems much worse.


From: BrianC (INKSQUIRTER) [#11]
 30 Mar 2007
To: laserman (MIKEMAC) [#8] 30 Mar 2007

I have done that Mike.....even my computer guy is not sure what is causing this....

From: BrianC (INKSQUIRTER) [#12]
 30 Mar 2007
To: Mike (MIKEHUNTER) [#10] 30 Mar 2007

I have no delay in ver 9 at all.........just X3. It's so frustrating because all these years of engraving I've just hit the button and the machines go right to work (except the Wizzard of course) :'-(

From: laserman (MIKEMAC) [#13]
 30 Mar 2007
To: BrianC (INKSQUIRTER) [#11] 30 Mar 2007

Brian,

Try the defaults button in the driver if that does not work try un installing the driver re boot the computer and then re install the driver.

You are using 1.07M version correct?


From: Hermes (HERMESSANDOVAL) [#14]
 31 Mar 2007
To: BrianC (INKSQUIRTER) [#1] 31 Mar 2007

You can also try a different printer like a laser or deskjet printer to see if the driver has anything to do with that. I have X3 but work mainly with 12 due to some stability issues. I also don't think the improvements on X3 are worth the increased consumption of the computer's resources.

From: logojohn [#15]
 31 Mar 2007
To: Hermes (HERMESSANDOVAL) [#14] 5 Apr 2007

quote:
You can also try a different printer like a laser or deskjet printer


I don't use coreldraw much for the laser engraver.

When sending to the c88 sublimation or Konica Minolta OEM laser printer I hadn't noticed slowness before doing the last 2 coreldraw X3 updates.

I had some customer art with a lot of objects and I fit 15 on a page.
I first tried the sublimation printer and it never did print.

I got distracted after sending to the laser printer and thought it wasn't going to work. Many minutes later it started printing. I needed multiple copies and from the print preview repeating the same thing one at a time started printed much quicker.

Show messages: All  1-2  3-15

Back to thread list | Login

© 2024 Project Beehive Forum