Full Version: Lapel Pins....100 pc but mixed
From: joyce (JLADY) [#1]
1 Apr 2007
To: ALL
I need about 100 lapel pins but the thing is there are all a bit different ....it is for number of years of service, so the only thing changing is a number that will go on them. They are in the shape of Nevada.
Does anyone know who can do these without having minimums of each of the styles.
I suggested..cut them on the laser but they want metal.
From: Stunt Engraver (DGL) [#2]
1 Apr 2007
To: joyce (JLADY) [#1] 1 Apr 2007
How about putting the shape of nevada (and other changes) on a 1" disc, through sublimation, OEM transfer or laser engraving?
Add an epoxy dome and clutch back and boom you have an inexpensive and impressive lapel pin.
EDITED: 1 Apr 2007 by DGL
From: joyce (JLADY) [#3]
1 Apr 2007
To: Stunt Engraver (DGL) [#2] 1 Apr 2007
From: Harvey only (HARVEY-ONLY) [#4]
1 Apr 2007
To: joyce (JLADY) [#3] 1 Apr 2007
From: Stunt Engraver (DGL) [#5]
1 Apr 2007
To: joyce (JLADY) [#3] 1 Apr 2007
If it's not a short deadline, you could have pins made that are in the proper shape and engrave the individual years in a space provided in your layout.
From: joyce (JLADY) [#6]
1 Apr 2007
To: ALL
From: RALLYGUY (RALLYGUY1) [#7]
3 Apr 2007
To: joyce (JLADY) [#6] 3 Apr 2007
Hi Joyce,
We can have dye sub aluminum cut into the Nevada shape for you if you were interested. Tooling fee's would be reasonable (probably under $150) for a smaller piece like a lapel pin.
I would need an art file with the shape you need to get some numbers for you.
I would also need to know your timeline to see if it fit with the production schedule of the tooling company that we use.