Full Version: Xenetech XGW32 TT Font Problems
From: Tony (ANTE) [#9]
2 Apr 2007
To: logojohn [#8] 2 Apr 2007
Logojohn,
That is how I get right height when doing TT fonts by drawing a rectangles size of finished text to be and then resize each line to fit in boxes, just as you show in attached image.
As for changing font appearance in advanced tab it is ok but it changes all ikons on desktop and page setup in Xenetech to much smaller bars all around. Is there a way to have ikons larger without affecting font layout in job setup.
Thank you for help
Tony
From: XGW Software Development (CATFISHBOILER) [#10]
3 Apr 2007
To: Cadwell [#1] Unread
Cadwell,
That is a very interesting TTF problem that you and the others have described. If you could send a saved XOT job that demonstrates the problem I will be happy to look at it and see if there is a quick solution.
Please choose an XOT that contains a line of text that you KNOW was saved at a certain letter height, i.e. 1", etc., and e-mail that job to tech@xenetech.com. Please include in the e-mail message such details as "the text height was saved at 1" in XGW version x.xx, but now when opened in XGW version x.++ the letter height has changed to 1.19" or .876, etc.
From what I understand in the other posts this text will also engrave at the new incorrect height.
If you send that XOT with the above details I will try to trace the problem down.
Cary