Full Version: Multi mat, fat-mat, sticky pads
From: joyce (JLADY) [#5]
3 Apr 2007
To: Mike (SPACE_ENGRAVERS) [#1] 3 Apr 2007
Message 6521.6 was deleted
From: John (ICTJOHN) [#7]
3 Apr 2007
To: Cody (BOBTNAILER) [#4] 3 Apr 2007
Cody,
Run that mat under cool water and air/pat dry..... I don't think you want to "rub" on it, it will last MUCH longer. I have had mine 4 years and the other brand I was using was only lasted 10-12 months.
The Multi-Mat is higher in price but well worth it. I thought one of the distributors is our very own Engraving Concepts, but I didn't see them on their web-site, so Jeannette will have to speak up if that is so.
From: Cody (BOBTNAILER) [#8]
3 Apr 2007
To: John (ICTJOHN) [#7] 3 Apr 2007
From: jeanettebrewer (JEANETTEBREWER2) [#9]
4 Apr 2007
To: ALL
Jeanette speaking up here!
We are a MultiMat distributor. 12x12 = $85; 12x24 = $170; 16x24 = $249; 24x24 = $329; 24x48 = $645.
From: JHayes55 [#10]
4 Apr 2007
To: Mike (SPACE_ENGRAVERS) [#1] 4 Apr 2007
As for clean up I do wash mine once in a while but for a quick cheap cleanup with out removing it I use a lint roller - just roll it over the area and pick up the chips - quick easy - I keep it by my Xenetech and use it whenever I see a few stray chips.
Lint roller is also handy if I get lint or chip on my bald head.
Cody are you listening??? 8-O
EDITED: 4 Apr 2007 by JHAYES55
From: Tony (ANTE) [#11]
4 Apr 2007
To: jeanettebrewer (JEANETTEBREWER2) [#9] 4 Apr 2007
Jeanette,
Do you sell single side Multi-mat, used with lasers.
BTW prices you posted aren't uniform as per square inch.
Tony
From: jeanettebrewer (JEANETTEBREWER2) [#12]
4 Apr 2007
To: Tony (ANTE) [#11] 4 Apr 2007
Tony,
Multi-Mat only comes in the two-sided variety. I know several folks use it with their lasers too. LaserBits sells something -- you might check their site.
I've never figured out how the MultiMat people figured their pricing but those are the prices they set. FWIW, the prices have remained the same for about 5 years now.
EDITED: 4 Apr 2007 by JEANETTEBREWER2
From: Harvey only (HARVEY-ONLY) [#13]
4 Apr 2007
To: jeanettebrewer (JEANETTEBREWER2) [#12] 4 Apr 2007
From: LaZerDude (C_BURKE) [#14]
5 Apr 2007
To: jeanettebrewer (JEANETTEBREWER2) [#9] 5 Apr 2007
Being oh so new to this, my question may seem dumb....but...
why is water wet?.... ( tee hee)
Seriously, multimat as I understand it is just something the prevents material from slipping in the engraver? It can be used with my new vision?
Thanks
From: JHayes55 [#15]
5 Apr 2007
To: LaZerDude (C_BURKE) [#14] 6 Apr 2007
I believe you have answered your own question, if it is a question. (tee - hee)
We would hope with your "new vision" that you could see your way clear enough to purchase a Multimat from Jeanette.
Why is water wet?
* Water isn't wet. Wetness is a description of our experience of water; what happens to us when we come into contact with water in such a way that it impinges on our state of being. We, or our possessions, 'get wet'. A less impinging sense experience of water is that it is cold or warm, while visual experience tells us that it is green or blue or muddy or fast-flowing. We learn by experience that a sensation of wetness is associated with water.
Water, of course, is molecularly H 2 O and this compound of hydrogen and oxygen is electrically neutral. However, there are also in water many free charged hydroxyls (-OH-, negatively charged) and hydrogen ions (H+ positively charged). These charged particles retain the ability to attract other charged particles (with the opposite charge) just as magnets do. In this way they stick or cling, involving other neutral H 2 O molecules at the same time. If water was made up entirely of neutral particles it would not cling, or wet, because the component elements would 'prefer' to stick to each other rather than to make bonds with other substances.
From: UncleSteve [#16]
5 Apr 2007
To: JHayes55 [#15] 5 Apr 2007
And we all know how important bonding is... especially when wet!! (devil)
From: jeanettebrewer (JEANETTEBREWER2) [#17]
5 Apr 2007
To: LaZerDude (C_BURKE) [#14] 6 Apr 2007
Chuck,
Yes, MultiMat can be used with your new Vision.
Our server is down for the second day in a row -- can't get email in or out (Grrrrrrr). So ... if I don't respond immediately to a post or PM from EE today, don't be alarmed. I'll try to check in here frequently ...
Have a Happy Hawaiian Easter!
From: John (ICTJOHN) [#18]
6 Apr 2007
To: JHayes55 [#15] 6 Apr 2007
It's Official!!
Joe has just confirmed his candidacy for President......
He has addressed Chuck's question without really answering the question.
He has expounded and given us facts on a subject nobody really cares about.
and........
He has used up his allotment of $2.00 words (tee - hee)
:O)
From: Harvey only (HARVEY-ONLY) [#19]
6 Apr 2007
To: LaZerDude (C_BURKE) [#14] 6 Apr 2007
Wetting is defined, (loosely), as the ability for a liquid to cling to other substances. Teflon is not a water wettable substance, skin is.
Try a test yourself to see if you are wettable by water. Do not hold your head under too long.
From: LaZerDude (C_BURKE) [#20]
6 Apr 2007
To: Harvey only (HARVEY-ONLY) [#19] 6 Apr 2007
Ok. Will do, but to bring the thread back on track, can I use my Multi mat to dry?
From: LaZerDude (C_BURKE) [#21]
6 Apr 2007
To: jeanettebrewer (JEANETTEBREWER2) [#17] 6 Apr 2007
GREAT! When I am sure of what size I need, I'll have you send me one.
Thanks
From: LaZerDude (C_BURKE) [#22]
6 Apr 2007
To: JHayes55 [#15] 6 Apr 2007
Candidate Hayes,
Don't be silly. Of COURSE I would.
From: jeanettebrewer (JEANETTEBREWER2) [#23]
6 Apr 2007
To: LaZerDude (C_BURKE) [#21] 6 Apr 2007
From: John (JOHNRMONTG) [#24]
6 Apr 2007
To: Mike (SPACE_ENGRAVERS) [#1] 7 Apr 2007
Mike ... after I got my engraver, I bought the Fat Mat and really like it. Like others, on small plates there needs to be another plate butted up against it to prevent it from moving or engrave a larger plate then cute to size after engraving. I have had it for close to 4 years now.
The only 'downside' to it at all is if you were to want to use the T Table slots, you would have to remove the 'backer plate' which is a piece of
1/8" acrylic which is adhered to the table.
I know this is part is not what you asked for but definately get the leveling kit for the engraver and 'level' the table or you will never get a an even depth of engraving without using the floating nose cone. Alternatively you could get some pieces of Coran to adhere to the bed and then level that.